captainhowdie Posted April 9, 2009 Report Posted April 9, 2009 Ok i just got my shee all put back together and was wondering where to start with jetting. Here are my mods and elevation: 600ft ASL, Toomey t5's, +4 timing, Noss head w/20cc domes 153lbs compression in each cylinder. V force3 reeds, Stock porting.Thanks for any help or advise! Quote
BansheeDan Posted April 9, 2009 Report Posted April 9, 2009 (edited) Ok i just got my shee all put back together and was wondering where to start with jetting. Here are my mods and elevation: 600ft ASL, Toomey t5's, +4 timing, Noss head w/20cc domes 153lbs compression in each cylinder. V force3 reeds, Stock porting.Thanks for any help or advise! What air filter setup do you have,we cant be much help with out that very important piece of info. Dan Edited April 9, 2009 by BansheeDan Quote
captainhowdie Posted April 9, 2009 Author Report Posted April 9, 2009 What air filter setup do you have,we cant be much help with out that very important piece of info. Dan Yea that would pry help. Im runnin pods (k&n) Quote
GrMeyer Posted April 9, 2009 Report Posted April 9, 2009 what i have been reading and hearing alot from guys that they are running are 27.5pilots and start around 310s for mains depending on temp... Quote
rubberneck Posted April 9, 2009 Report Posted April 9, 2009 320 mains, 25 pilots air screws 1 turn out, and stock needle on2nd or 3rd notch from blunt end. check plugs. When cold out, i run 340s, hot weather, 330 or 320 at sea level. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.