coorslight125 Posted March 31, 2009 Report Posted March 31, 2009 my neighbor is a profesional welder and i wanted him to extend my swingarm for hillclimbs but he has never done one is there any schamatics on it any where i just want a plus4 for hillclmbs Quote
toolucky Posted March 31, 2009 Report Posted March 31, 2009 My friends banshee has a two inch extended swingarm that was fabbed by the previous owner and it works great. Basically all he did was cut it and add two inches of square tubing to each side, purchased a longer chain and he was good to go. I believe he had some type of jig that was mounted on rails that he attached the swingarm to so when he cut it apart it wouldnt move out of allignment but it would move along the rails and it would hold both pieces secure so they could be welded. Quote
tapout94 Posted March 31, 2009 Report Posted March 31, 2009 you would need a longer chain and a longer break line. just make sure you make the cut after the shock mount(closer to the rear). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.