Loc Posted March 27, 2009 Report Posted March 27, 2009 I know that this is different for each bike but the idle screws are complety out and I need a starting point. The bike has KN pods, FMF Fatties and that is it. Thanks. Quote
Woolfman Posted March 27, 2009 Report Posted March 27, 2009 I know that this is different for each bike but the idle screws are complety out and I need a starting point. The bike has KN pods, FMF Fatties and that is it. Thanks. what kind of idle screws with tors or not maybe motion pro? Quote
dajogejr Posted March 27, 2009 Report Posted March 27, 2009 As a rule of thumb on any carb I setup. I look in the back of the carb, and in/out the idle screw until I can JUST see the slide start to move up. I then turn it in 1.5 turns. You can make 1/4 and 1/2 turn adjustments from there, remember....you want to set the idle while warm. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.