help with 2 into 1 carb jetting

[shee2stroke]

This is my first banshee so im trying to find out what to do with tuning my carb. The bike has cool heads but im not sure what is done inside the engine. It also has trinity stage 4 pipes and silencers, also a stage 4 2 into 1 carb set up with a kiehin carb. The banshee runs good but is dogging in every gear. its not as snappy as my friends banshee is. Any help with what jet i should run or what to change is appreciated. Thanks

[lowbuckracing]

pm snopzinski here in on the hq..He will fill your cup for you if you ask nicely..

[sredish]

you need to find out what's in the carb. what needle ,what main jet, etc. is it a flat boggy feeling? might try raising the needle a clip to see if it helps.

 

let us know what's in there.

[Snopczynski]

This is my first banshee so im trying to find out what to do with tuning my carb. The bike has cool heads but im not sure what is done inside the engine. It also has trinity stage 4 pipes and silencers, also a stage 4 2 into 1 carb set up with a kiehin carb. The banshee runs good but is dogging in every gear. its not as snappy as my friends banshee is. Any help with what jet i should run or what to change is appreciated. Thanks

 

190-195 main, eej or eek needle in center clip, 42-45 pilot jet, and air screw out 1.5 turns. Start there.

[shee2stroke]

Thank you very much for your help im going to pull it apart and see what i have in there. then im going to start with the set up above and try that.