what carburetor for my set-up

[dogzilla5178]

ok here is the deal I have an 05 banshee with the following mods. T6 pipes, shaved head, +4 timing, taper bored carbs, k+n pods, boysen rad valve reeds. It ran really good till I overheated it. I am going to tear the motor down and do the following, agressive dune port from kevin at herr juggs 4mm stroker crank and noss head. I know my pipes are not the preferred for this set-up but I am going to try them before I get something different if not just out of curiosity. also I wanted to know what size and brand of carb is best for this set-up. I was looking at some keihin 30mm carbs but think maybe 33s? or should I just give the stockers a chance? I would like to retain some low end

[Snopczynski]

ok here is the deal I have an 05 banshee with the following mods. T6 pipes, shaved head, +4 timing, taper bored carbs, k+n pods, boysen rad valve reeds. It ran really good till I overheated it. I am going to tear the motor down and do the following, agressive dune port from kevin at herr juggs 4mm stroker crank and noss head. I know my pipes are not the preferred for this set-up but I am going to try them before I get something different if not just out of curiosity. also I wanted to know what size and brand of carb is best for this set-up. I was looking at some keihin 30mm carbs but think maybe 33s? or should I just give the stockers a chance? I would like to retain some low end

 

The carbs can depend greatly upon the pipes you run. I would figure that out first.

[jayzx10r]

I agree with^^.

Other factors to consider would be intended use, (such as sand use only, trails, hillclimber, drag) desired powerband and altitude. If you are kinda high up there, you might choose a smaller carb due to the thinner atmosphere.

Pipes, porting, and carb size should be a package design parameter decision.

 

So, what are you gonna use it for and what's your altitude? I run 33's on my 4mil at 200ASL in the sand at Glamis and wouldn't want anything bigger.

 

And Welcome to the HQ!! :thumbsup:

[dogzilla5178]

I run only in dunes at sea level and I will be running my t6 pipes for now but gonna get inframe cpi's. I drag on occasion for fun but mostly just a duner

[Snopczynski]

I would run a set of Mikuni TM 32mm's, or a dual 33mm pwk setup.

[Invader]

i would talk to kevin. Have him match everything. I bought carbs from him and i thought it was a reasonable price. plus if those t-6 are in good shape you can get some good money for them!!