BANSH-alena-jol-EE Posted March 16, 2009 Report Posted March 16, 2009 how do i tighten the chain, there is a little slack, i had my axle bearing changed 2 weeks ago and the chain was really tight then...now it has gone slack again? Quote
wesw Posted March 17, 2009 Report Posted March 17, 2009 do a search but stock carrier there are to long bolts that need to be loosened 15 and 17mm if i remember right then you extend the lil bolt under neath to push the carrier out. then snug that down and then tighten big bolts. Quote
2001Stroker Posted March 17, 2009 Report Posted March 17, 2009 By the way, it shouldn't be really tight. You should have about an inch of up and down slack in it, with you sitting on the bike. If it's tighter than that, you could break the case where the primary sprocket is, or break the chain and it could bust your cases. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.