klemet banshee Posted February 12, 2009 Report Posted February 12, 2009 how much should i take off?? my compression is 140 in both cylinders and im 60 feet above sea level i want to keep it on pump gas also will this be a good mod for trails and open streches Quote
AKheathen Posted February 13, 2009 Report Posted February 13, 2009 you will have to have the chambers measured. i have heard that they vary from head to head, so, just get them to 21cc, if you are at sea level. they should be able to do it at the shop, and make sure they aren't using a belt planer to take much more than a surface plane. i like the look of a mill cut too, personally. Quote
BansheeRider87 Posted February 13, 2009 Report Posted February 13, 2009 Anyone have pics of a milled stock head?> Quote
deckheight Posted February 13, 2009 Report Posted February 13, 2009 This one is for a stock stroke 100 octane motor. You can see the tig welded plugs in the thin areas. http://img442.imageshack.us/img442/6383/dsc01501jk8.jpg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.