chads300 Posted January 20, 2009 Author Report Posted January 20, 2009 sorry lol i know i suck at explainin things but here is the story: at first the quad would run fine start on the first kick but when you would get on it, the right cylinder would not fully kick in and when you held it wide open it wold completly dog out. so i tore the carbs ,reeds,airbox off cleaned the air filter ,the reeds are brand new and i clened the carbs..... i put it all back together and now i am it will not start by knicking it but like i said it will start if i get pulled but it will pop/backfire like cray when i am just setting still it runs like a fucking champ past half throttle it jst throws this fit when it is not getting ran. i also noticed that it still has the cylinder kicking on and off before half throttle after i am at half throttle though it kicks on and stays on...... Quote
chads300 Posted January 20, 2009 Author Report Posted January 20, 2009 ok guys i found some probs my first find was that the tops of my carbs (the caps were loose) and my choke tube opped off i hope this will fix it! Quote
BUILDER Posted January 20, 2009 Report Posted January 20, 2009 ok guys i found some probs my first find was that the tops of my carbs (the caps were loose) and my choke tube opped off i hope this will fix it! LOL ya they will not run for crap when that tube is off. Quote
chads300 Posted January 21, 2009 Author Report Posted January 21, 2009 that was the problem lol thanks everybody for the help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.