SSSSSS! Posted December 22, 2008 Report Posted December 22, 2008 New to HQ and thought I would help out. I use Scotch brand double sided foam mounting tape to mount my grips. Cost $5 a roll, very sticky stuff, seals out all moisture. With a slightly larger grip I don't hold on as tight which helps with arm pump. The foam also decreases vibration. Just use air pressure to mount. You can use it over and over again. Have yet to have a grip move a fraction of an inch. I see people using tape to seal up the axle and locking nut. I use sylicone gasket maker. I squirt it around the outside of my rotors and on the threads of my axle nut so it doesn't back out. It will keep sand and water out of your bearings. You can save 30% off OEM parts, 25% off other stuff at staryamaha.com through Feb 1. They let me know in advance when price increases are coming. My Banshee is a Vito's 404. I have been running the Trinity single carb for over 10 years. I ride MX, trails and dunes. Ride on... Quote
BansheeRider87 Posted December 22, 2008 Report Posted December 22, 2008 welcome bro! where about you live? Quote
05.Banshee.SE Posted December 22, 2008 Report Posted December 22, 2008 Welcom to the HQ. By the looks of your post, you should fit in just fine here. :biggrin: Quote
1996dragshee Posted December 22, 2008 Report Posted December 22, 2008 Welcome to HQ! Good posting on the staryamaha.com. Saving money on parts is always a plus! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.