dt200532 Posted December 17, 2008 Report Posted December 17, 2008 Just put the tors eliminator kit on and im not sure which slide barrel goes in wich carb or if it matters,how do i tell,also both barrels have what looks like someone drilled part way through them,is that supposed to be there,new to banshees any help would be great thanks Quote
05.Banshee.SE Posted December 17, 2008 Report Posted December 17, 2008 There should be half moons cut in the bottoms, and they should face the rear of the carbs. Hold the slides so the halfmoon is facing you. Now look on the right, and left sides...we'll say "15 minutes" each way, from the rear of the slide. There should be notches. The side with the right notch goes in the right carb, and vice versa. Quote
dt200532 Posted December 17, 2008 Author Report Posted December 17, 2008 There should be half moons cut in the bottoms, and they should face the rear of the carbs. Hold the slides so the halfmoon is facing you. Now look on the right, and left sides...we'll say "15 minutes" each way, from the rear of the slide. There should be notches. The side with the right notch goes in the right carb, and vice versa. Ok thanks alot Quote
peterlocal22 Posted December 17, 2008 Report Posted December 17, 2008 did you get it back together? Quote
dt200532 Posted December 18, 2008 Author Report Posted December 18, 2008 did you get it back together? i think so was just doing all the carb work befor i get the top end back friday,ill find out if its right then. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.