Motor is DONE!

[278]

This is probably the wrong forum, but whatever. Just wanted to show you guys what I've been working on. It's finally done except for a few fininshing touches such as installing electrical, finish polishing etc. it's set up for trail/mx as that all I really do, all mods in sig. what do you guys think? and can anyone give me a ball park estimated HP with thos mods plus the mods in the coming soon section. still working on the frame, but will post pics when that is done!

Edited November 8, 2008 by 278

[2001Stroker]

Looks good. The only thing I would do different, is take every other HD clutch spring out and replace it with a stock spring. 6 HD springs will be hard on the forearm. Especially if you plan on riding trail or MX. Post some more pics when you get the case all polished.

[278]

Looks good. The only thing I would do different, is take every other HD clutch spring out and replace it with a stock spring. 6 HD springs will be hard on the forearm. Especially if you plan on riding trail or MX. Post some more pics when you get the case all polished.

Yeah I hear ya, I think I'll do that in the process of finishing the final touches

[Wildcardracing]

looks like it's coming along nicely. You should be in the mid 50's with those mods.

[278]

Here's some final pics with the reeds installed and the case fully polished, the polishing looks like shit in the pics IDK why, but whatever :biggrin:

[T_Shee]

man that looks sweet. you have a lot more patience than me. cant wait to see it all finished up

[Michael Jackson]

leave all 6 Hd springs.. the tusk HD springs are not very stiff at all unless of course you are built something like dustin diamond back in the saved by the bell days, you wont even notice once your riding

[Wildcardracing]

I don't know about that MJ, I have 3 Tusk HD springs in mine and it's a very noticeable difference.

[278]

For now I'll stick with the 3-3 set-up. Once I ride it a bit if, I can go stiffer it doesn't take much to change them out