Nightrider
-
Posts
563 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Nightrider
-
-
Sounds like detonation to me, only thing that would shatter the plugs like that. looks like your getting just enough to wreck the plug. Maybe a combination of lean condition and bad alky?
-
no the chrome is in good condition, very shiney when cleaned
Kodie , if you do the rims black,post some pics,I was thinking about PC the rims but never got around to it.
I guess the old school gold wheels grew on me.
-
Its always the same piles of shit that come to the table.You've done nothing but exposed yourself to all the other hqers to what shit pile maggots you all really are.I rounded all of you maggot motherf*ckers up like cattle.Now everyone here can see what your clan is really about.Thanks for making it easy.
Take notice at these fine individuals that you HQers heartedly accept advice and do business with.This is who they really are.Its nice to know what level a person is at before you attempt to converse with them.
Your welcome for the freebie.I know some people just wanted to avoid the contraversy related to this or commit forum suicide.I'm a man,I fear no one,especially some attention starved people who need social acceptance among their banshee brethern.
Your popularity will diminish much like Bush's after Iraq.
-
You and the yahoo's running these boards have done nothing but ruin the name of Banshee Hq.Yea,I did say something to Lee about it.I'm a man and I fear no one.You and your crew have done nothing but f-ed up the forums in your favor.I was here long before you loco,when the hq was a place that anyone could surf.Now its a sesspool of scumbags and you manage the pond.
There are a few older members that probably remember the original hq.its long gone.This has become a bluetraxx.Same bullshit,different dickheads.
Thanks for ruining a good thing.
-
I think we had one outspoken person who riled everybody up and got responses appropriate to his posts.
-
You can have all the fun you want with it,but I am offended and disgusted to see that LEE let maggots like you have your way and run your mouth.This use to be a great site to visit.Now its just another site.peace.
-
Dude?who the fuck are you and when did you come to Banshee traxx.
What do I care what my name holds around here.I didn't become a member of this site 5 years ago to "make a name for myself" like you plan on doing.I have a name and a life outside the the square box your starring into.I'm just here to trade information,sell parts etc.I have dealt with a number of hqers and they know Im a square dealer.
I am the nightrider because I'm black.Being that and not revealing that fact,I've come to see over the years who the real shit piles were at the hq.From there I chose not to deal with or side with them or anyone who supported these scumbags.
Your black?more like lily white.
Like I said,great website this has become.If it didn' have so much to offer,I would have never come back.But we don't need punk ass whiteboys like you.
-
These forums have become ridiculous.Now we seem to have a gang thats running the hq and its seem to be the same idiots squabbling over petty shit.All they bring is hate and now racism to the table.
I'm black,I find that racist and I am offended.If anyone should be run out of here is maggots like ellison.But he's blowing the moderators so he can speak his mind.Great website this has turned into.
-
Again,crossover tubes are do exactly what they were designed for.Boost bottles will do the same for the weak minded,definitely not jedi status.
Boost bottles are not surge tanks,their a cleverly thought out gimmick.For 25 bucks you can get a +4 degree key,unless your just looking for some bling,bling,then you've probably already wasted money on useless blings.
-
-
I ran into the same problem after I installed a upp slide kit.I could only run a 13/41 for about a month,thats when the chain would stretch beyond adjustment.So I jumped to a 13/42 which left me ample adjustment.The 13/42 was a good combo for 22's and trail.
-
A friend of mine swears by them,but if you ask me,that chamber adjust ment system looks sloppy,not to mention the huge o-ring and keeping that sealed chamber sealed.
-
Sometimes the carbs have to by jetted differently. I don't know why, but I know I am not the only one that has had to do this. I run the same mains in both carbs, but I have my needles set on different clips and I adjust my air screws separately. If changing plugs and re-syncing the carbs doesn't fix your problem, I suggest moving the needle clip on the side that isn't firing properly.
Never imagined someone would attempt that.With the exception of the needle or needle valve being severly worn down,I could not understand why you'd have to do that.Maybe with one new carb and one thats been in service since the inception of carburation it could be possible.
Check your needle clip,check your carb sync and make sure your idle height is dam near the same for both slides.Then adjust air screws the same and fire it up with good plugs
Providing the compression is close on each side ,the reeds are in good shape,and the crank seals are good.You should have 2 cylinders firing almost identically.That is,if its not electrical
-
I run 290 main ,30 pilot,stock clip,1.25 turns out with same setup.
-
I strongly disagree.I have been running them in my 01' since it was new.I also run PC pipes and really use the over revv the pipes have to offer.I get about 25 hrs out of a set of reeds from my v-force.My rad valve banshee gets about the same.The cases deform from combination of over tightend /heat.I have never experienced a cracked or shattered reed petal.
-
I like Wellsville,but a few of my riding budz don't.Its one of my all time favorites.
Oak hill is down by the WNF Telegraph trailhead.Its also called Firebrick.
Probably the only other place I'd rank in front of Wellsville.Its an old mining complex on about 20,000 acres.Alot like wellsville but alot more to offer.
Theres anywhere between 300-1000 people out there on a sunday.
-
I've had mine since 02'.Changed out the reed petals twice and never had a problem with screws coming loose or breaking reed petals.
Were you running spacers?Did you set the reed tension on low?Did you clean the cages before you reassembled them(loctite will not set if theres oil or fuel film present.)Could be installer error.
-
I'm just south of cleveland too and I know a couple of the OMR guys.I'm a member of the OMR forums also.OMR banshee riders are far and few between,so he won't be hard to locate.Give him a chance.
-
A bunch of people are meeting at yellowcreek for some non sanctioned drag racing.There are various classes including a 2 stroke and open.They also allow 2 strokes to run with 4strokes.For information and directions,go to http://www.ohiomafiariders.com/ look under (planned rides).Not tryin to plug the site,just want a good turnout.
Its a stones throw from the Wellsville riding area(a definite bonus)
-
Lookin for a new or newer banshee crank,preferably ready to go.Welded or unwelded,doesn't matter.Pm me if you got one.
Thanks
-
Worked great on my white plastics.Only gripe was it would come off in patches from pressure washing and reapplication was necessary.It did leave a nice shiny hard surface.
-
Your probably only looking at like 5-10 psi max.I get 155 hot and 150 cold
-
The manuel specs for stock pistons is .002-.0025.With any cast piston,you do not want to exceed about .003.Cast pistons have a experience minimal expansion.Any more than .003-.0035 and your pistons will wear out rapidly.
-
I just rejetted and at WOT and 1/8 throttle I get a nice tan brown plug but meantime it smokes out the silencers and also has alot of oil coming out. How can the plugs be perfect but the silencers still smoke and drip oil?????????????? Also I am using a twist throttle and removed the TORS , so how do I adjust the idle now. It starts ok if I give it some throttle but when I let go it will stall out.
Could be your needle,a little too rich in the mids will load up your pipes with oil.Alot of quads I see out there are jetted like this.Runs good on very bottom, rough in the mid and cleans out well on top.
What was your point of even posting on this thread? Yeat alone, who the fuck are you? Your name holds no weight around here son, remember that!!!!!
piston porting?
in Banshee Repairs and Mods
Posted
I tend to leave the size alone,but i usually chamfer the ports to create a smooth transition between the windows and pistons.It can be done with a few handfiles and takes about 20-30 minutes..Not sure if the gains are substantial but it should make for a better flow.
here is a rough diagram,you can see how the piston ports are not opened up,they are just blended to the intake windows.