supercoop
-
Posts
113 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by supercoop
-
-
thanks for the reply. Did yours come with instructions? do you have to remove anthing to install it? Does the PEP one have adjustable settings?
-
has anyone got pics of a denton steering stabilizer installed on a shee? i'm thinking of getting one of these as they sound to be better than the other ones for the money. Also are they difficult to fit and where do they go?
thanks.
-
thanks for the replies, i'll have another go.
-
I have just got some new AC Pro Peg Blackline nerfs. However I am having a little problem. I need to take the bolts out that are just in front of the motor. However it is very awkward to get a spanner in as the pipes are in the way. I have got DMC Alien pipes so could this be the problem as they are different from stock ones? Will I need to remove the front pipes to get in? But this seems abit stupid just to put 2 new bolts in.
Can anyone help me?
Thanks.
-
they are the stock 7/8 renthal ones with cross brace. I understand what you mean by making a small gap on each side. I'll have a go at doing that.
-
I have got some new renthal bars and I am using stock bar clamps. However when I have fitted them there is a small gap of about 5mm on each clamp. I have posted a pic for you to look at. Please can someone tell me why this is?
-
does anyone know if you can get different coloured netting for the ac pro peg black nerfs? they all seem to come with the black netting.
-
PLEASE DELETE THIS POST
DOUBLE POSTED BY ACCIDENT
-
Can anyone tell me if the UM Pro Peg Nerf Bars are any good for the banshee. What is the quality like? What are they like compared to AC ones?
-
Can anyone tell me if the UM Pro Peg Nerf Bars are any good for the banshee. What are they like compared to AC ones?
-
I am looking at getting a tire changer for my banshee. Will something like this be ok http://cgi.ebay.com/Rand-Portable-Tire-Cha...1QQcmdZViewItem
or can anyone recommend anything else?
-
ive got them on my shee. Had them on for nearly 2 years. Had no problems with them.
-
does anyone know any online atv shops that sell these new moose racing grips?
http://www.mooseracing.com/catalog.jsp?lin...roup=Handlebars
-
has anyone had the duncan racing mx porting done to their shee or know anyone that has had it done? if so how much power increase did you notice?
-
I will be getting some new handlebars in the next few days however will I need to re-locate the ignition? I have seen it done on quite a few quads where it has been moved to the side. Is this easy to do?
-
does anyone have pics of a DG national series front bumper on a banshee? if so please could you post them here......thanks.
-
does anyone have a pic of a steering stabilizer installed because i'm not too sure exactly where they go.
-
has anyone got a gibson steering stabilizer on their shee? do they make much difference to the handling and are they easy to install?
-
does anyone know the cheapest place to get the Faast Flexx bars for the banshee from and that will ship to the UK?
-
a good start is to get some nerf bars and then make the bike wider by putting a new +4 rear axle on and +2 a-arms. You then can buy new shocks such as Elka and also buy some new pipes, DMC, Toomey, Paul Turner, FMF, Pro Circuit. There are alot of different pipes to choose from.
You can get good deals on parts from RockyMountainATV.com
hope this helps.
-
thanks for the replies so far. I have been looking at the 404 Big Bore sleeve kit at Vito's Performance at http://www.vitosperformance.net/BANSHEE.HT...%20SLEEVE%20KIT for $469.95
would this be good for me or can you recommend anything else?
-
-
can anyone tell me what are the best mods to increase acceleration and low-mid power for MX? nothing too expensive though.
-
Wicked A Arms
in Suspension
Posted
i've got wicked a-arms on my shee. I've had them on for around 2 years now and have had no problems. Excellent value for money!