Jump to content

Chuysrt

Members
 View Profile  See their activity

  • Posts

    3

  • Joined

  • Last visited

 Content Type 

Posts posted by Chuysrt

  1. Botls kits??

    in General Banshee Discussion

    Posted


    Whats up guys got a 1997 banshee i recently took it apart and got it powdercoated now i want to put it back together can you guys help me out?? Anyone knows or can recommend a kit that has evey bolt new my oem one's are rusted and in bad shape
     
    Thanks in advance
     
    Sent from my SM-N975U using Tapatalk
     
     

  2. What you guys recommend

    in Banshee Repairs and Mods

    Posted

    A 392 is a stock stroke with 68mm bore, to get the most out of it you would want to go for a 4mil and make it a 421. 
    Going that far with the bike can be more expensive, so my recommendation would be to start with the basics. 
    Get an adjustable timing plate, some aftermarket pipes, chariot reeds, and some 34mm carbs. These mods alone will add a ton of power and throttle response to your bike. You will need all of these things if you decide to go to a 392 or 421, so might as well start there. You can also get a lot more power out of your bike by getting port work on your cylinders.
    If you have these things and later on want even more, go for the full 421 setup. I say to do crank/cylinders at the same time because it's not that much more of a stretch to pull the crank once motor is out and cylinders are off. If you start with just the 68mm bore and later decide to do the 4mil as well, then you will need to change from 513 pistons to 795, get cut domes instead of standard, and also need to either change your head or get a spacer plate.
     
    Appreciate the info so yesterday we took the head off and noticed aftermarket pistons and porting but to be honest we don't know what might have been done to it and as far as pipes i bought some used t5 toomeys for 150

    Sent from my SM-N975U using Tapatalk

  3. What you guys recommend

    in Banshee Repairs and Mods

    Posted

    Whats up guys i got a 2002 banshee all stock and it that time for some mods i mostly do trails and maybe a race here in their im not trying to go all out but i am considering maybe a 392 or a 4 mill and anyone help with some advice on which route to go iv seen alot of 392 take out 4 mills what you guys recommend thanks in advance

     

    Sent from my SM-N975U using Tapatalk

     

     

BHQ Quick Links

×
×
  • Create New...