[Stator Plate Mod | VIDEO | Easy!]

I didn't feel like ordering and waiting for an adjustable stator plate, so I modified mine to accommodate +4 timing. I made a video and posted it on my YouTube page! If you like the video subscribe; I will be putting up more videos like this one!

 

Thanks for watching!

 

Mike

 

 

[New Member!]

Green and purple. Huh.

Looks good keep it going!!!

I intended to do blue green and white. The paint I chose changes from blue to purple depending on the light; it came out pretty good though!!

 

[How to change your linkage bushings VIDEO!]

What's up guys,

 

I made a video on how to replace the bushings in your stock linkage. I hope this helps someone! Please let me know what you think and subscribe to my YouTube channel if you found it helpful or if you have any suggestions on how I could have done it better! I know the audio got messed up in the last minute but the good stuff is all in there.

 

Link - 

 

Thanks again!

 

Mike

[New Member!]

A grand??? Lol.

Welcome to bhq.

If you stick around that 1k will will go up fast.

The whole build is on my YouTube channel; it will be around 1000 when done. It could have been much much more though haha; parts get expensive quickly.

 

Sent from my SM-G925V using Tapatalk

[New Member!]

Welcome to BansheeHQ! Be prepared to surrender your piggy bank to the Banshee!

It's already happening

[New Member!]

Hi All!

 

My name's Mike. I've been around quads and dirt bikes my entire life and I have always had a passion for them. I've had just about every sport quad at one time or another and I FINALLY pulled the trigger on a Banshee, and I wish I hadn't waited; I'm obsessed!

 

Anyways, I bought a 90' Banshee (Thought it was an 89' but literally just discovered yesterday that it's a 90') and it was thrashed pretty bad so I decided to restore it. I made a YouTube channel to follow the build in hopes to possibly show some of my tricks and entertain! I attached a picture but the quality isn't the best.

 

I am not a mechanic by any means, however, I've been working with motors since I was 7-8 years old; I look forward to helping anyone with their projects and problems!

 

Thanks for reading!

 

Here's my channel to see my Banshee!

 

https://www.youtube.com/channel/UCUtcRpxcq2zhMRkBWpaegsw

 

 

Mike