Jump to content

Bikelife305

Members
  • Posts

    50
  • Joined

  • Last visited

Posts posted by Bikelife305

  1. 7 minutes ago, ginger said:

    what ratio are you mixing your fuel at?  if it is really rich or has a lot of oil in the ratio it will make it smoke extra.  remember it is supposed to smoke a little it is 2 stroke. 

     

    32:1 ratio.  I know it's a 2stroke but smoking way to much then what it support too then any other banshee next to me.

  2. Here what's going on when I get on the thottle it puff a cloud of white smoke on both sides more on the leftside, motor has been sealed new main seals and no leak in cases not burning tranny oil or no coolant.smoke smell real strong like fuel..could it be that is time to rebore my cylinders? 150psi both side  mods: ported 64mm cylinders, 35mm carbs, stock crank, CPI pipe,

  3. my problem is my bike running rich... here what i have done CPI exhaust, Drag ported Stock cylinders, vforce 2, 35mm PWK carbs (set at: Main:152 Pilot:48 Needle:CGL)
    i can put a set of new plugs on my bike and ride it all day and the plug would Still look New out the box with no color also the exhaust tips has alot of unburnt fuel on idle it smoke alot on both pipes....... i have try goin smaller main jet to like a 148 But then my plugs gets white

  4. 10 minutes ago, Ayesully810 said:

    trim some wire off of your spark plug wires about 1/4 inch then plug boots back on, try again. also make sure your pick up coil gap is set correctly.  I set mine at .018

     

    I try two different coils.. but haven't check the pickup gap

  5. 15 minutes ago, Columbus350 said:


    No your problem is because it's only running on one cylinder, you're most likely pulling the plug on the one cylinder that is actually running . From your symptoms you said above it's only running on one cylinder at Idle that would explain why when you pull the plug it kills


    Sent from my iPhone using Tapatalk

    No I'm pulling plug off the cold side that's Not running.

  6. 33 minutes ago, Ayesully810 said:

    Both plugs fire at the same time. Only the side you take the cap off of the plug should shut off.  Why do you ask?  Are you trying to diagnose a spark issue?

    I'm having that issue on one side not starting till I hit the throttle then it would startup then on idle it back cold

    • Like 1
  7. i'm having a issue with my shee.  the issue im having is that my right side while the bike on idle it stay cold as soon as i hit the throttle it fire right up on high rev but once i let go it feel like it shuts off while the left side stay running,  carbs are sync good, both slider in the right way, Piston were Recent Changed, i have swap the plug wire ans the problem stay on that one side then i have swap carbs from the left to the right and the problem stays on the right side, i have rebuild carbs. both cylinders has same PSI.   what Could it be please Help!!! 

  8. i dnt give a fuk about the price but be real about your sell... if the first question i asked was Do you still have the tranny he could easily told me it in a pending sale ill you know and that would of end the whole conversation.... people just talk extra without know the real fact. and if you selling something there should be no problem with the buyer asking you 100 questions because its a buyer right to ask and is there money thats going to be spent on the item Dont matter if it a dollar im still going to ask all the questions i want.....

  9. asked a few question about the transmission i was very interested as soon as i offer him 55 now he wants to tell me o someone want it but the person aint send the money yet if you aint like the offer just say no. then i said ill pay the 75 that you want now he dont wanna sell it to because i guess tryed to offer 55. then he wants to tell me if the guy back outhe would let me know.... SMFH money right here in paypal it should be first come first serve!

×
×
  • Create New...