Engberg27
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Engberg27
-
-
Wondering what's out there for a rack. Please pm with your asking price shipped to 58103. Thanks
-
Just hang them from the ceiling
-
Ill take the headlights
-
Sorry black and yellow hoodie 3x after reading your post. Pm for payment
-
Black hoodie 2x
-
I got mine like I said for 50 a piece I am sure they will honor the coupon code if you message them?
-
-
No shit it almost got the sledge and the sawzall
-
They are kick ass lights. The 4 inch is 1650 lumen the 20 inch bar is around 11000 if I remember right.
-
I also got the 20'inch dual light bar . They pulled that code or?
-
Moonshinexxx lights. I bought some 4inch square ones for my truck. They are normally 100 a piece but if you put 100off in the check out you can get both for 100.
-
I got it running....I think the throttle cable got pinched or something when I put it back together......and for the bogging it was the fucking parking brake that was connected unplugged it and it runs great now.
-
Yep all looks good. Am I right for cutting the tors wires that were stripped? They are not supposed to be twisted together or anything?
-
The two are for the throttle control sorry , and it has a twist throttle.
-
No they are keihin carbs. I don't even have the stock carbs.
-
Ok here's the deal I was firing on one cylinder, so I swap carbs and plugs and nothing. I had replaced the plugs and it was running on both when I first got it.
I have been putting stuff off and on and now I am at the final stages. So I go to start it and it is running on one cylinder and bogs down and will die when I give it throttle, but it idles great.
I thought it was electrical after I started looking at tors that was cut and crap, so I cut the wires that were just hanging there. 6 wires total 4 for the tors and 2 for the ignition control?
After I have done all of that I go start it and it just takes off revving at full throttle WTF I even disconnected the box and same thing. I checked the throttle cable and everything is fine like I said it was bogging down I reached under cut some wires now its full throttle.
Pj carbs yes I checked the idle screw.
-
What's your best price on the fronts?
-
Ill take the light switch
-
I want the front shocks
-
Ok here has what's been going on I have got all the bearings done. I have been getting the parts put on the machine that I bought on here from a bunch of awesome and helpful guys.
I have to get everything were I want it figure out the electrical and she should come to life....I hope
http://i1135.photobucket.com/albums/m624/engberg27/2013-10-29_19-37-25_514_zpse612e915.jpg
http://i1135.photobucket.com/albums/m624/engberg27/2013-10-29_19-38-13_988_zps36f27128.jpg
http://i1135.photobucket.com/albums/m624/engberg27/2013-10-29_19-34-20_345_zps595b5699.jpg
So far so good. It was a pos when I bought it I have only worked hard on it for about three nights.
-
What parts are you missing? I will have some stuff left over and I can email you pictures of the wiring diagram or anything down to what size bolt or nut needed for anything.
-
1
-
-
Well this is what's going on now. I am replacing the rear main bearings,the front bearings,getting hardware to bolt everything together and ........waiting for parts.
-
I just bought the 150 set for my banshee, it is not here yet I am replacing everything and yeah fuck stainless it's too soft!!
-
The thread is screwed up..I guess I'll try to re thread it thanks for the help guys.
Looking for a six pack rack
in Wanted
Posted
Found thanks bhq