Fireball Racing
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Fireball Racing
-
-
Fireball Racing manufacturers swingarms, a-arms & steering stems for all the Honda, Yamaha, Suzuki & Kawasaki ATV's.
Swingarms. stock lenght to plus 14"
A-arms. For play riding,TT racing, drag racing & moto-x.
Steering stems. Stock lenght, +1" & +2"
Billet axle carriers. stock to 40mm bearings.
Billet aluminum axles. For TT racing & drag racing.
Billet intakes w/crossover tube inside for Banshee cylinders & Cub cylinders.
Build custom sand drag chassis. Chromoly & Titanium.
Fireball has been building ATV's parts for over 25 years.
For prices & to order. Call 559-324-9533
-
Fireball Racing got the invite to the huge event in July too. We will be there.
-
Dyna rev box drl 300 cdi rev limiter will work with a 9 volt battery. Use a good battery, it will last 6 months or longer. Just unplug the battery when not racing.
-
we do, we have been building them in our jig for about 4 years now. they are 412.99 shipped in chromoly powdercoated and ready to bolt in and go.
-
please contact the shop at 559-324-9533
we can do that for you no problem. please use coupon code bhq0001
if paying via paypal you can send the payment to tammy.winiger@century21.com
or call our shop number to pay via credit card over the phone.
please note if you do send via paypal make sure to include information like hubs and everything so we can get the order correct. Please also include a call back number if we have questions on the order.
w/r
Fireball racing
-
ill pick one up............is it gun drilled?
every a arm kit we sell comes complete ready to install with tie rods and bushings where applicable.
We have all the kits ordered.
please use coupon code BHQ0001 when ordering. for those of you that have sent requests for orders thank you! I will be contacting you individually today. with order information.
quesitons or concerns please call the shop at 559-324-9533
-
+2+1 arms as well. Let us know
the axles are adjustable down to 26"s of adjustment and as wide as 30"
we can also do +3+1 for the motocross arms with or with out ball joints.
-
+2+1 arms as well. Let us know
LImited time only.
385 shipped for +2-2 light weight drag arms 4130 chromoly powdercoated
350 shipped for +2+1 with a ball joint. motocross arms 4130 chromoly powder coated
420 shipped for +2+1 with a heim joint motorcoss arms 4130 chromoly powder coated.
candy colors are extra chrome available as well for additional cost.
-
we have 2 on the banshee drag axle. looking for 3 more.
A arms i will get back to you guys tomorrow on +2.
as for narrow we are only offering them in +2forward -2narrow. They are jig built so building another jig is $$$$
I will try to post a group price on +2 and drag arm kits for you guys. Give me a few days. to sort out the prices.
thanks for everything guys!
-
FOR SALE FORUM
Failure to comply with the BansheeHQ For Sale Forum rules may result in the deletion of your post!!
3. Prices are mandatory! This is not eBay or an auction. Failure to post a price will result in deletion of your post.
sorry i was just trying to see what folks would be intersted in. We are new to alot of this advertising on forums. thanks for bearing with us.
we could do banshee drag axles for 375 shipped.
we could do banshee swing arms for 525 shipped with the bearing carrier and caliper plate kit.
-
Checking to see what kind of interest there is on a group by on here for a arms and drag axles?
Since we are a new advertiser on here we want to offer you guys something to say thank you for allowing us on your site.
Please post some suggestions.
We are thinking Drag Axles.
and or billet head kits,
or A arms or ?????
here are some of the parts we make for the banshee.
-
Checking to see what kind of interest there is on a group by on here for a arms and drag axles?
Since we are a new advertiser on here we want to offer you guys something to say thank you for allowing us on your site.
Please post some suggestions.
We are thinking Drag Axles.
and or billet head kits,
or A arms or ?????
here are some of the parts we make for the banshee.
-
We sell a complete A-arm kit for the banshee, which uses yfz450 shocks and is extended +2 and uses the correct geometry with very little bump steer and you gain the full travel of the shocks we have tested and they work awesome. Their are a few members on this forum who have bought them from some of our vendors and love them. I will try to get some pics of them for you guys.
we see about 13-14" of travel.
-
thanks guys we are excited to be on here! we have quite a few banshee parts available and are always coming up with new products and ideas.
would like to add we are now offering 50$ off any suspension product for bansheehq members.
please mention coupon code : BHQZX1
thanks guys!
-
Hello, I am fairly new to the forum and am looking for some advise on extending my swing arm. I am about a 195lb rider and am wanting to know if I will have to modify my stock rear shock at all with going +4 longer. I hear a lot about changing springs and such, so just wanting to know what I will be getting myself into.
Thanks
I would recommend going with an eibach spring, and a revalved shock, at the very least revalving for your rider weight with your riding gear on. This will make the ride so much more comfortable for those long dune rides. Any race tech shop in your area can take care of it. Or you can call our shop and we can recommend a good shop to service your shocks. The stock shock will work, but bear in mind the banshee was originally sprung for around 175lb riders. that said the extra leverage and your rider weight revalving is highly recommended to get the most out of your banshee suspension. (your back will thank you in the dunes)
-
people run this combo alot. i would recomend just buying aftermarket arms and shock made for the shee but thats just my opinion.
we sell a 4130 chromoly extended arm with the correct geometry for the yfz 450 shock. we have had great results with it and lots of good feedback. they run quite well with his setup. plus the yfz shocks are rebuildable and fully adjustable.
call our shop at 559 324-9533
-
Generally you will want to change the spring for anything longer then a plus 4 swing arm. changing the shock length would require different linkage like the elka setup.
but the longer arms are not typically built for longer shocks but rather are extended past the shock mount point. that said it will certainly change the leverage on the shock, which is why we go to a stiffer spring like an eibach for extended arms.
Fireball Racing - 10% discount for BansheeHQ members!
in Sponsor Spotlight
Posted
Hey guys, we don't get around to posting much due to being very busy in the shop.
We do want to make sure that everyone knows about our 10% discount for BansheeHQ members.
Give us a call for any of your suspension component needs.
Roger
559-324-9533