[Stock rear spring measurements]

Bump anybody have these measurements? 

[Stock rear spring measurements]

Anybody know or can link a thread that has the stock rear spring measurements?

Looking for length, Inside Diameter are the main ones.  If someone knows the compressed coil bind height, number of coils, and coil diameter, that'd be great too.

 

Going to respring the stock rear, I'm 225lbs with stock swinger, ride glamis only.  Looking at 450lbs/inch to 475lbs/inch any experience or recommendations?

 

Thanks

[WTB -Seat, Rear Master Cylinder, petcock filters]

I'm rehabbing a 88 Warrior (YFM350x) and I believe these parts are the same as on earlier banshees.

 

I'm looking for:

1) Seat with good foam and cover

2) OEM petcock OR just both petcock filters

3) Good solid rear master brake cylinder

 

 

Please PM me what you got and price you're looking to get without shipping.

 

We'll figure out shipping once we agree on a price.

 

Thanks

[44 Lectron done by Packard, with adjustable powerjet]

Selling my 44 lectron with adjustable power-jet done by Dennis Packard

 

Here's the ad, will take $325 + shipping for members.

 

http://orangecounty.craigslist.org/mcy/2053097798.html

 

Call me ONLY

Bret

949-388-4111

[paddles trade for flat track tires]

Can you send me some pics , PM sent

 

Thanks

Bret

 

like it says im lookin to trade a set of rear paddles on rims for a set of flat track tires on rims. i dont have them with me they are either sand skates or scat tracks i dont remember i never used them, took em on trade but dont have any sand around here. they are 20/11/9. pm me a number and i can send pics

[front elka's w/ remote ressie's]

Got Marvins or cash PM sent

 

parts i need, set of marvin shaws, [\quote]

 

 

 

 

Call me 949-388-4111

[front elka's w/ remote ressie's]

Got Marvins or cash PM sent

 

want to sell my front elka shocks. going to a drag bike. they are on my +2+1 setup right now. in excellent shape, has remote ressies with stainless steel lines. has adjustable compression, rebound, and preload. here is the link to them from elka, but mine have the ressies not mounted to the shock: http://www.elkasuspension.com/?q=atv-stage3

$600 shipped OBO.

 

parts i need, would trade for: drag axle, complete set of marvin shaws, 10 paddle extremes, lockout clutch with aftermarket basket and cover, etc. anything drag oriented.

 

call or text me at 940.782.9435

 

 

[04/06 yfz 450 part out]

Still got the front shocks? PM me pics & price.

 

Thanks

 

Got a 450 with a 04 frame and the rest of the bike is off a 06.

Parting this bike out. everything goes except wheels, tires and handlebars w/clamp

the only thing aftermarket on this bike is the motor, pipe and K&N.

 

ALL ITEMS ARE PLUS SHIPPING

06 Motor, less then 1hr on it since rebuild, 480cc, cylinder works cylinder, high comp piston, cam mod, new cams, new clutch, new crank, new timing, only thind untouched in this motor was tranny and valves. Has a small leak underneath, no cracks just didnt seal up like factory, asking 1800.00 for motor will include carb and wiring for another 200.00 carb has a idling issue when coming off throttle, prolly an easy fix.

 

titled 04 frame and subframe, powdered orange, the bolts on the subframe have been pulled out so when you mount a rack you need bolts and nuts 450.00

 

Shortened DRD pipe w/header (back side of mounting tab is cracked, still mounts fine) 150.00

 

K&N with billet mount 50.00

 

Front end, aarms, shocks tie rods and hubs 300.00

 

rear shock 75.00

 

swinger 75.00

 

axle 75.00

 

black irin cross front bumper 50.00

 

Black PAINTED plastic. not the best in my eyes but im real picky 150.00

 

And a bunch of misc parts from a part out. hubs, oil tanks, gas tank, steering stem

 

I would like the motor to sale before the rest gets parted.

 

WILL TRADE ITEMS FOR DRAG BANSHEE ITEMS