CrazyBRONCOguy

I have both http://bansheehq.com/forums/index.php?showtopic=151890&st=30 pics on page two i believe Just got the Alba's put on. they are beefier for sure. I have the fullflights and I upgraded to their black hiems. I've not had any issues with the fullflights. Mine are still in good shape if you wanted a used set, mine need paint. I also have a set of 2" wheel extension from fullflight to make the rear match the front. But back on topic, the alba's are nicer beefier arm then the fullflights. I like the camber setup too as its easier, not the fullflights where hard just took awhile to get. Also the tie rods that come with that alba are twice as thick as what they are with the fullflights.

I can yes, you want from the ground to where on the frame?

The only reason they do not extend as far as the full flights is becuse of where the shock mounts to the arm, as in the fullflight mount is 1" (aprox.) higher then the Alba mount. I don't think the fullflights have any more travel then the Alba's, they just make the quad sit higher in the front. This is assuming that the frame will not bottom out with the Alba's which I do not know yet. I am awaiting Alba's answer as to what the LT shock length is suppose to be for these arms. I was figuring for an 18" ish shock and yes that would make it even with the fullflights, as far as how far down the lower arm goes, like in my comparison pic

they let you mount standard travel shocks and then switch to longtravel later with the same arm. Pics might be a little decieving, i think its not as much differance as it looks. Also I took the shock loose and with a set of long travel shocks the arms will go as far as the full flights are in the pics.

good to know on the bushings got them put on the rest of the way, I didn't take measurements between the two. Another thing I noticed is if you look at the fulllflight side and then look at the alba side the tie rods are at a goofy angle compared to the arms on the fullflights. On other stuff i have messed with this is bad, the Alba arms put the tie rods much closer to being parallel. Its noticably lower but I dont think that's a bad thing. I can measure the arms realitive to each other if you know what you want, I just get get the mounted dim's anymore. Also off topic, Im kinda diggin the no plastic at all look

Only have had time to losely bolt up one side. those are standard travel Elka stage 1's. The arms on the left are fullflights. Notice the shock mount makes the fullflights appear to have more travel but I dont think they do, its just where the lower shock mount is. Also I checked the wheelbase and as fas as I can tell the Alba arms are plus 1 too as they measure the same from side to side and the fullflights are +2+1's Should be installing the other side tonight, hopefully I will get pics of the complete setup on the ground. Im waiting on a few other parts to take it on a ride.

pm sent, Also are these compression or rebound adjustable????

Got mine in the mail earlier this week. Look good, you can see how the standard travel link goes in, in the pic. I should be able to get them mounted up soon, I'll post more pics when I get to that point. Also the included tierods look beefy but I will not be using them.

I got a set on the way. Will post some pics when I get them

I have a Dual Gasser setup on my quad. I like the twist most of the time, Also the the thumb on it is easier to push then the stock one. Did that tape really hold it togethor long enough to ride it?

35 obo shipped

Decent stock fronts, I no longer need one had a spot on it that look like it was from someone trying to break the bead or something I cleaned it up a little with a file and it looks fine now. 40 OBO shipped tolower 48 via UPS will ship from 46530

Easy to deal with stuff came exacttly like the pics and prices are very inline with what I think they should be. Will buy from again. -Brandon

SOLD

I have one prodesign 22cc dome and one prodesign 20cc dome. Look to be in good condition but they are used. I have no use for them, so if someone needs a single one let me know and they are yours(or just one) for the cost of shipping. Which should be cheap will easilly fit in flat rate box. -CrazyBRONCOguy-

I am going to try and make this one. SL flags too tall on a quad at the Badlands? I know sometimes on the trucks they get beat up cuase of the branches and what not

Im just across the stateline in IN, Granger (close to elkhart).

Yup, I have not had an issue at the hotel eithier though, but my stuff looks like junk too. I do run a chian though it though when i park it on the trailer.

I should be able to make that, going up opening weekend too. I might just do saturday though, depends on my schedule. I usually stay at the Sierra Sands when I go They also sound check stuff too so sparky's might not get you passed the gate if its stil too loud

I also had a good deal with tundish. Paid for paddles and they got here the next day look perfect. Definentlly buy from again

Need some upper a-arm bolts, the long ones. Let me know if you have any. Thanks, Brandon