kolb02
-
Posts
159 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by kolb02
-
-
Apparently every other pic I have is too big so I can't load it. My number is 406-670-5108 if you want me to text or email them to you.
-
This bike has a 552cc 12mil with a 2-5 override tranny. Has a factory lightend frame, bike weighs 290lbs. Makes 135hp and runs 3.9's in the 300ft at 6500ft of DA. Will run faster at lower altitude. Everything is perfect on this bike. Im asking a lot less than whats into it. It is one of the cleanest out there. Asking $9000 OBO. Will except reasonable offers. No trades
-
These are in great shape! used very little, come with drag cut light weight Yamaha bolt pattern rims. $350 shipped
-
-
A guy did it in my town. Just get someone that can airbrush cars really well.
-
-
-
Here is a vid of her staying right with a 12mill. same weight
-
Here is a sid shot.
-
This bike is a 421 cheetah cub drag ported by RDZ. This bike makes well over 100rwhp on the dyno. runs on methenol, bike only weighs 290lbs. Not only is this bike very very fast but it is a show bike as well. this thing is perfect! custom air blushed plastic! Ask any questions you want. I will help out with shipping. This bike alway attracts a crowed any where I go. Full stellar a arms and swinger, direct drive clutch and wheels. This bike has won to king of the track trophies. Runs in the high 3's with no wheelie bar in the 300ft. There is 12k just in parts in this bike. Asking $5000. if you want to contact me you can call me too. 406-670-5108.
-
These were sold well over a year ago.
-
Anyone?
-
My buddy has these Ti A-arms that he got for his 450 that weigh 4lbs total with bolts and spindles. They have a single rod up top that can convert to a strut when your running the 300ft.
They are bad ass, He got them from a Kam at KBR. I wounder if they make them for the banshee's?
-
Does anyone make titanium A Arms and swing arm for the banshee?
-
Word to the wise: make sure the seller actually measures the roll out to confirm they are 78". I've bought 2 sets of "78 roll out" 14 staggered extremes only for them to measure 75" - 76" at normal pressure (2 - 4 psi or so). I have to blow one set up to 8 psi, and the other up to 10+ to get them to 78". What's bad is I already had a set of 76" 14 staggereds. So now have 3 sets of essentially the same size tire. I wasn't duped by the sellers, they had bought them as 78" and never measured them.
Cool man, how do I make sure they are the right r/o? And I think you are helping my buddy Seth build his YFZ 450 drag bike for the 4 stroke wars?
-
Let me know if you have any for sale.
-
did I miss what size swinger was being used? Sandtoyz is where I bought ours.
I was running low 4.1's with no bar and I was 220's on a stock chassis. I was using 13 extremes, +12 swinger. 12.25 rear shaw w/link and 12.5 front shaws. 18" front tires. Like I said.. chassis setup plays a huge part.
+12 swinger here and struts all the way around.
-
Where is a good place to get the 14 paddle extreme staggards if I decide on them? I might try them first!
-
do you know anyone that has either and would let you borrow them?
that is what i did. paddle tires are really expensive, especially the staggards.
Thanks for all your help! I don't know anyone that has the staggards. I think I will start with the 73 ro 14's.
-
I was using a 78 rollout 14 extreme staggard on my 4mill last season. Seemed faster that my 72ish roll out rippers that i was using. Where i race is heavy course sand and it seems to like more paddle and less gear. Ill be using a new setup this year so ill be starting over again. Lol
Well shoot, 78 ro 14 extreme staggard or 73 ro 14 extremes?
-
if its a heavy track I would probably go with the 73 ro 14 extreams......
the staggerd paddles seem to work better in the fluffy dry sand.....
Our sand is pretty heavey in my opinion. It's always moist and wet for some reason. What size tire is the 73 ro 14 extremes? And what size rim should I run?
-
Each bike is different. I have ran 73 Ro 14 extremes on my 4mm cub. Worked pretty good but i weigh 165ibs so I spun them like crazy. So now I have a set of 78 ro 14 staggered extremes on a 10" rim they seem to be working better for my weight. I'd go with the 73 Ro 14 extremes best all around tire IMO, Also works great with many motor combo's. Shayne is right it all depends on your bike setup as well. You gearing type of chassis mods and overall weight
I weigh 170. I wil change my gearing if I need to. Which one should I do?
-
Chassis setup will play ALOT into paddle selection also
12-14 extremes in a 72-73 RO depending on chassis setup.
I will be running struts all the way around with a wheelie bar. What size you thinking?
-
I need to get a set of paddles for the 300ft drags! Our track is all sand so it's kinda heavey, thats what I hear from other racers. I haven't been to any other sand drags to tell the difference. My bike weighs 300lbs and is a 421 cub drag ported by RDZ. It is on Meth, and I will be running a wheelie bar. What kind, type, rollout of paddle do you guys think I should run? I ran 4.4's on gas and no wheelie bar last year.
1994 12mil Drag banshee hillshooter
in For Sale - Complete Bikes
Posted
You might be right. But I will keep it if that's the case. Im willing to deal, but that's just a tad lower than my bottom dollar. I have had a lot of nice bikes like the one in my sig which I sold for $6500. This is twice the bike and haven't seen any other bikes this nice. Not saying there not any other ones as nice as mine just that this one is a 10 out of 10.