-
Posts
767 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Drewski
-
-
Sawzall. You can use a grinder, but thats going to be a giant smokey mess!
A grinder will work lol, but take it from me you won't enjoy it. All the melted burnt rubber gets everywhere. It turns into a tar and is a bitch to get off of anything it sprayed on. And your clothes......you may as well just throw them away.
After your done one tire, there's still one more to go. It's not worth it!
-
bought a crank of this guy, works great, maybe u people buying used parts should learn that they are USED parts.
Your crank is going to explode!!! Not sure if it will be because minkia sells shit for parts, or because your a fuck wad and carmas a bitch.
-
lesner in the first by knock out.
-
I just received the brake line. It only took 2 days to get here and is a brand spanking new stainless steel speedline still in the package.
Great guy to deal with!!!
-
I love my rockets and they sound way more badass then CPIs.....just my opinion though
-
How about some of these?
-
I sold Les some stock carbs a while back and have been giving him a little help along the way on his build via PMs .We just recently had a conversation in the shout about how I blew my rear brake line while out riding and how I was in need of one.
Anyway, he had an extra asr stainless brakeline, brand new that he insisted on giving me free of cost or shipping. It should be here by wednesday just in time for my trip to the dunes. Just want to say thanks, you saved me a weekend of riding and it's good to see there are still some decent people out there!!!
Thanks!!!
-
I bought my relocation bracket from GB off ebay.....just wait for the auction. It comes and goes. I think I paid 27bucks for it. It's a great piece!
-
Are you just looking at the plugs? You should jet big and go down according to plug chops. Also, if your worried about air leaks, Do a leakdown test.
-
55-60
-
As far as I know, you want to use the O-rings unless you want a gummy mess on your motor. My rockets use stock exhaust o-rings fine. Maybe try greasing them a bit.
-
Good deal for $100 bones!
-
I used it on my g-force axle with stock carrier until I bought a roundhouse. Just use it to be safe.
-
do you have a pic or a link to the auction? It could be a stock crank with different bearings. Yes you can reuse the half moon clips.
-
the aftermarket cranks usually use bearings with O-rings to keep the bearing from spinning. You should be fine.
-
Ignorant Canadians.....I hate them
-
no problem. I use a RK x-ring chain and have been using the same sprockets and chain for almost 2 years and I ride on a regular basis.... every weekend and 2-3 times during weekdays in the season. I paid $80 for the chain. Well worth it IMO.
-
I agree with the pilot 100% go down to a 48 or 45. Also your gearing is quite a bit too high for a second gear launch with what you have tire/motor etc. I'd run stock gearing 14/41 or even a little lower like 42/43 in the back. It will still run 70-80 mph in 5th with lower gearing.
BINGO!!! I have the same set-up running 50/50 pump and c-12, 20cc 4mm domes, +6 timing, 35mm pwks, with 45 pilots, cel second from top, and 158 mains. I had 48s for pilots but responded like crap. Through in the 45s 1 1/2 turns out on the air screw and now it launches HARD in second. Go down on the pilot.
-
here's some reading for you!
http://www.quality-cycle.com/truth_about_motorcycle_chains.htm
-
get them powdered for sure. Even powdercoating will come off and get scratched in time but nowhere near as fast as paint.
-
it will go up after the break in period assuming you did the rings
-
PM member RUKO on here. He runs a Magura hydraulic clutch.
-
there will be no justice!
-
YA....what he said^^^^
YFZ Shocks and +2 arms
in Suspension
Posted
I'm pretty sure Fireball makes a-arms for the yfz 450 shocks