-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 400banshee
-
-
what size bearing carrier and does it come with stay
-
i guess you got it past the blow up stages finally???
yes got the prob fixed so far so good
now just gun shy on the jetting i know what i think it should be but dont want to pull the trigger yet
-
trying to get some suggestions . 485 pv trinity shearer inframe s.b. pipes 35 mm. p.w.k pump gas +4 timing. elev 1000 feet. what some jetting any suggestions?not here to argue. just looking for some hints in the right direction .
-
if you still have this when i get my 485 fixed i would be interested ill check when i get it back if i knew when i would tell you i would deff, but they are taking there time getting back to me
-
my shit looked just like that after 10 min there is a guy in hazleton pa that looks like that to sucking antifreeze cyls look like they ran for five years
-
Never running a 485, my opinion might be void but 145 main and 44 pilot jets on that large of a motor sounds incredibly lean. Most 421cc cubs are running 160+ mains and 50+ pilots. What is your elevation? It could be possible that detonation/heat cracked your insulation? Anyway, carry on...
891 feet a.s.l
-
hmm well here's a start its got the wrong o-rings in it it was lifting the head enough to blow the o-rings out. causing them to look like that, was also mostlikely eating coolant also. the heads i have found need to just about fall on the cylinder if you have to beat them on or push REALLY hard they wont tq right and are prone to blowing o-rings. also they seem to like a very flat profile and a very small squish band like around 9mm!! or even less. get VITON o-rings. get lesser squish domes ( like .49-55) and you may want to just drill out the head just a smidgin i mean just enough on the stud holes that the head goes right on and right off. the higher sqush band will make the motor rev MUCH easier and actually make more tq. and be even more potnet overall. and also make sure the squish angle is correct for the domes..
they are getting a LIL better i rember when there was almost NO dome in there adn it was ALL squish band like 15-20mm!!!! those were some detoin, o-ring eating fools
if you want check out RKtech heads they have a SWEET head/dome set up for these motors.. and witha lil bit of measuerment can make a sweet custom domes set for your motor its well worth the $$$$
thank you for a great answer it is very helpfull i beleave that what you said is what happened as for the drilling the head you me the domes in this case i had to force them on
thank you brian ps any info you can give me would be great
-
-
trinity
my buddy has the same one no prob but another guy had the same thing happen
-
ever on this motor 35 mm carbs with 145 main and 44 pilot timing is +4 comp is 150 psi .049 squish
-
http://i520.photobucket.com/albums/w323/bansheet3502008/100_4669.jpg
hey i have a 485 cheetah pv and on the first ride today and this shit happened the insulator broke and smoked my motor never had this heppen so befor i fix it i want to have a idea of the real cause of this dont want it to do this again
-
I got doubles and tripples of everything LOL
how much for the cases shipped to 17872
-
i just wish i could turn that hil back to what it was when we first went there then it be alot more fun a washed out rocky wet sloppy mess that was atleast 10%steeper then it is and has been for a wile
-
i cant wait you soud like a idiot all i said before you ran your yap is that i know for a fact that no atv only dirtbikes climb that hill but now i just think your a scumbag so look me up for sure when you come up i dont care who is better then i am at climbing
-
Holy fuck you little girls are quick to jump someones shit...you ever notice the 6 is next to the 9, i fuckered up ok, i guess my buddy never flipped his 421 making a new climb at mile hill either...he was prob up there not long ago...he had a black and monster energy kfx450r with an axle and houser arms that he just sold a few months ago...i climb and i have friends that climb, i dont live there but we trailered up there a zillion times, i prob met you guys before, dont break my balls, you sound like these guys from north carolina that tell me i'll never make thier little hills and then they think i'm nuts when i roll up them in 2nd like nothing...my shee needs about 2 grand worth of work to be big hill worthy, but in the spring, il be up there, stock ported jugs, stock swinger extended 4" and paddles or vampires or something climbing everything you guys are and trying new hills, i grew up in harwood mines outside of hazleton, i learned how to ride in the silts when i was 5 on a benelli 50, i have been out riding every weekend since, the peak, hell i used to climb the peak when it actually took skill, when i was a kid my dad used to take me out and watch dune buggies climb every weelend, now anyone who has balls can climb it because WE made a climb about every 5 feet around the whole hill and now its BEAT, stockton was pretty decent, tit mountain, poosas, thousand foot drop, about 100 other random pits and banks in h-town,sorry if you think youre the only ones in the world, but you're not...that area all along 61 has amazing and very dangerous hills, but thats what I do too...nice try at the bullshit thing tho, if i was full of shit, i might feel bad, now i'm just more motivated to get up there and get some good PA hydro and get my pizza and climb on, i fucking miss good italian food and pieroghi like you wouldnt believe, my mom just got back from a visit there and brought me farmers tea and a box of senapes pizza, i sat down and ate the whole shit in like 5 minutes...i even missed the fair this year, lol...like thats a bummer, you guys are good, but i can climb too, you'll see...
i think the shit you smell might be still in the air from that guy on the craptor...or is that your upper lip from all the shit you talk because i push a wrong button on a forum, i posted the wrong link on a forum and i typod a bunch of shit in the shoutbox the other day too, OMG...who gives a fuck, really...
i hope i see you when you come in the spring to see if your big mouth only runs on the computer your the one that said 06 not us you didnt climb it in 06 so stop running your yap learn to read asshole i said you did not do it in 06 i dont care who did what the hill is easy
-
2006, with my blue shee..no problem
not didnt happen 2006 there was a dirt bike trail to it nice try thou
i spent my hole life up on that hill but thats a good one thou if your going to say you did something make sure it is not a thing the hole town would no about if you did so inless you are invisable or have the smallest 4 wheeler ever i smell bullshit
-
how long will a set of paddles last
maybe 10 weekends for aeros or cyclones but other shit 2 or 3 good weeks
-
Fuck, guess I'm out.
im not saying that you wont be able to ride if your an asshole just saying that if you act like a dick people will bother you please do come
-
I would love to come out there and ride them hills... You guys against out a towners coming and riding your hills or what?
no this place is always filled with out of towners as long as you ride and your not asshole no one will bother you
-
I had the overall fast time of all bikes and ATV's until the second round. Even then, I think there was only one or two bikes that beat my 4.2. Bike has more in it. Just need to get the gearing figured out a little more. Every hill is different.
what gear do you shoot these hills in 2nd 3rd
-
hahahaha... he shit hims self... that awesome... he ruined all the performance stickers on his bike... lmao... elka sticker no elkas... he prob had a honda ricer in parking lot at home...
DiSkOe*1
-
i think thats the moment that he shit himself
-
he would of made it had he had the right tires
no 1 said he wouldn't make it the hill is easy now if you have tires but he didn't listen
-
Holy shit that thing picked up speed QUICK.
that hill is stupid like that your bike starts backwards right a way and you cant dig your feet in
some parts
in For Sale - Parts & Accessories
Posted · Edited by 400banshee
is it roundhouse style if so how much to get the 35mm to 17872 befor friday or on fri