omalavet

any???

im going to by a new protaper handelbar with the adapters. what rise should i get the handelbar....? i ride enduros and trails..

my shee is leaking oil from behind of the fill cap .... i havent do nothing to the shee .... i change the clucht like 2 moth ago .... put a new seal.... but its been two month now what could it be??? it have all the screws in...

i ride in puerto rico were the trails are brutal!!! we start at sea leavel and end up at 4000 feets and take many road .... mud .... rock.....and i use teh maxxis all-track tire size 22.... on stock rims

i ride 1 once a liter

any?????

of that bumper installed on a shee....???

yeah thanks people i think i what to get the works i what them with a black spring and i will not be jumping i ride enduro races...no jumps there just hardcore trails.... but what about that triple rate springs???? or dual???? what should i get and what is the diference from one to the other????

can i buy just the fronts??? or i need the rear ??? any one now if i can at steelers with a black spring??? or any other color??? my shee is a 2005 with a red frame whit fenders nothig to do with a BLUE suspension!!!

i want to get a set of shocks to replace my stock ones but just the shocks..... what would be th best one to buy ???? and i wonder if i buy like an elka shock to for my banshee would they be the same lenhgt as the yfz450....??? would you recomend puting shocks on stock a-arms??? i don't want to spend a lot of money cause i want to buy a new yfz450 like in december

i want to get a set of shocks to replace my stock ones but just the shocks..... what would be th best one to buy ???? and i wonder if i buy like an elka shock to for my banshee would they be the same lenhgt as the yfz450....??? would you recomend puting shocks on stock a-arms??? i don't want to spend a lot of money cause i want to buy a new yfz450 like in december

i have a skid plate and it broke i what to buy a new one but in puerto rico trail are mean and ground clearence is a big problem so what is the hardest skid plate and the one that leaves me with more ground clearence

here is a better one http://www.dunereview.com/electricalupgrade-1.htm

im from puerto rico here the gas pump is in liters... i just use 1 once per liter

i use flex Drive

here is a pic

check the cable those cables are like crap!!1 they wear off really quick and get stuck and the lever to water and lot of were can jam the thing if not that you say it have lots of meat!!??? buy new ones!!!

i have that the tors remove and i still have that little black box in the chassis and is still conected but there are two black cables black and yellow!!! the were cut and connected together i disconect them and the shee dosent start what do i do now??? if connect the two black and yellow wires together the shee starts but i have read about removing torts and havent heard what does cables do!!!! i wonder that becausee wen those cables get wet my shee will accelerate it self!!!! HELP PLEASE thanks in advance

hello but i bought a used banshee and it have the torts already removed and wen my shee gets wet it will accelerate it self!!!! and i saw two cables put together they were to black and yellow cables i wonder if those are the two cables you were talking about i remove those cables and the shee wont star put them back again and now problem i put some black tape around them so they will not contac water and accelerate i think the problem is solve but i wonder if i can remove that box ???? the box that you talk about is still there is a small black box that is in the front left size and is mounted under the tube of the upper chassis above the spark plugs??? can i remove that???

http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sspagenameZWDVW full set 300

i dont now the real # but mine is almost touching the little metal part of the fly wheel all i now is that it has to be really close try to find it n the manual download it here http://www.bansheehq.com/forums/index.php?showtopic=68045

yeah at frist it was that gap that could not get the shee started but ive already fix that and now is something else i dont now

i didnt pull the card off at this time i just adjust the screws and wont start in the cold im from puerto rico so a cold start is like 75-80f

i bougth a used shee 2005 and every morning that i want to start it it wont start i HAVE to use the engine start fluid to start it then wen i put fuel in again even when hot it dosent start once again and some time wen i go really fast in six gear for a long period and then i come to a stop and it wont start....HELP