Farmtruck
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Farmtruck
-
-
will also trade for 38 lectrons or one 48-50mm lectron
-
How many full drag bikes are going to be there for this event. was thinking about coming but we want a lot of people to race agianst with fast bikes. I know atvdragracers set up a ride on the same weekend @ little sahara... lets get list of what will be there if we can heres what we would bring
2-10mil dm's
14 cheetah
7 mil dmx
752 nitrous raptor
-
they have large knob ftz power jets have larger capasity bowls have new line to put on power jets have 3 to 4 sets for jets will get all jets I have. have a thumb throttle cable and filters also. $450 SHIPPED OR TRADE FOR A SET OF 40 OR 41 LECTRONS
-
How much for the seat shipped to 98360
this bike is sold
-
-
Shearer left side pipes for DM cylinders 54mm flange with silencers painted black $400
Shearer sbsf handconed left side pipes $425 these pipes work bada$$ have had some cracks have been tig welded up itis not noticable on the bike
GRR sbsf right side pipes with silencers $250
lone star 40mm drag axle outer spline are not in great shape needs nw outer hubs(worn). It has banshee inner hubs honda outer hubs $250
Lonestar +2+4 chrome axle for stock banshee has all hardware $150 or $200 with inner and outer hubs
prices are shipped
-
Shearer left side pipes for DM cylinders 54mm flange with silencers painted black $400
Shearer sbsf handconed left side pipes $425 these pipes work bada$$ have had some cracks have been tig welded up itis not noticable on the bike
GRR sbsf right side pipes with silencers $250
lone star 40mm drag axle outer spline are not in great shape needs nw outer hubs(worn). It has banshee inner hubs honda outer hubs $250
Lonestar +2+4 chrome axle for stock banshee has all hardware $150 or $200 with inner and outer hubs
prices are shipped
-
I need a kick starter would be nicw if some in Oklahoma city area had one I could get before the weekend but if you have one left me know.
-
I want some shearer oof same side small bore small flange with or without silencers
-
-
Can you post of the extremes? What kinda shape are they in, any holes in them, how many trips do they have on them?
They do not have holes in them they held air all winter... they are one year old and have about 6-7 trips to the dunes the nipples just got worn off but still have sharp edges.
-
-
21x12x8 single buff 10 paddle extremes on douglas blue lables in good condition $250 shipped
21x7x10 sand star fronts in great shape on blue lables $125 shipped
older style ac pro pegs w/o heels gaurd lowers peg down 1" and back 2" recent black powder coat $100 shipped
Digitron with 2 egt probes used for two races and a trip to the dunes needs weld in bungs for probes $210 shipped
will post pics tonight
-
Quality chrome isnt going to be cheap. With chrome you get wat you pay for!
Contact Bk_banshee I had him chrome ALOT of shit for me. He did an AWSOME job! He chromes aluminum too.
Yea I sent him a pm about two weeks ago have not heard back from him... I have seen his work the local place wants $350 to show chrome a swingarm I think that is a little high and their work is not that good
-
I have not found a good place here in oklahoma that does good chrome for a reasonable price so I think I and going to ship the stuff. I need to chrome some drag A-arms, swingarm and some motor mounts...
-
I have a 2003 4mm Motor for sale.
Right now the Lower Half is ready to go with a Hot Rod 4mm Crank and spacer plate for jugs. Compelte Lower half of Motor $500 plus shipping.
I have a freshly bored and honed set of ported jugs that are 65.50mm with NEW wiesco Pistons to complete this motor. They are on the way back from FAST right now. $450 for them. (just spent $250 on pistons, bore, and hone)
I will put the motor back together and sell it running and fresh for $1050.
location?
-
Does any one make some light weight drag j-arms that are standard width or -1 with +3 /3.5 forward? metal tech has a-arms listed on their website that are standard with 3.5 forward but no j-arms...
Nevermind I called metal tech and they make them... thanks
-
Does any one make some light weight drag j-arms that are standard width or -1 with +3 /3.5 forward? metal tech has a-arms listed on their website that are standard with 3.5 forward but no j-arms...
-
looking for j-arm frame in decent shape no bends, large dents or large areas of rust paint does not matter want to cut and lighten frame may also consider a-arm frame looking in oklahoma city area unless it is a great deal on one to ship. wanting to spend less than $200
-
Are you just wanting hill shooter type chassis or stock framed bike
-
I have some 22x11x8 sls 9 paddle haulers they were bought this spring and have about 5 rides on them I am in OKC area I will take $275 for them.
-
Did you grind the side of the carbs down. If you did'nt grind the side down the idle screw will not go in far enough to make it idle. As for it taking a while to idle down, I would look how far you have the throttle cable adjusted at the carb tops.
Yes they were ground down the screws will move the slides.
-
Ok We put a tors removal kit on my buddies shee and can't get it to idle can get it close but when you rev it it takes a long time to idle down 10-20 seconds have played with the idle screws and airscerws they are about one turn out it has 17cc domes pro curcuit pipes and k&n filter in the stock air box no lid +4 timing
-
are the hubs and everthing sold aswell?
Yes
2011 BansheeHQ Spring Ride St. Joe State Park (Park Hills, MO)
in Riding and Events Forum
Posted
all of our bikes are suspended chassis don't like racing at tracks...