02ss

everything but sync tool still available, make offers

sync tool sold, I'll do $50 shipped on the VF3s blubanshee98

everything's still available, including VF3's and tail light

I know somebody needs a good straight stock crank to build up instead of wasting money on that Hotrod crap...

pmd you 01sheerider

Make offers on this stuff guys, I need it gone, thought I was pretty much giving it away though...

vf3s and tail light sold pending payment

link to pics: http://s480.photobucket.com/albums/rr168/jeremyco01/

Cleanin out the garage, all parts are used but good condition, prices + shipping, I'm in Eastern, NC I take paypal VForce3's, need 3 reed petals $40 2-1 intake, not sure of brand $50 Stock Crank, selling as a builder but rod bearings have no up/down play $50 Radiator, no leaks, no cap $20 Stock intake boots, one clamp missing $10 Stock reedcages with boyseen reeds $15 Stock reedcages with stock reeds $10 Carb sync tool with 2 adapters, used once $40 Stock nerfbars, have some rust, will be beedblasted before shipping $20 2 overflow tanks, one has hoses $5 each Stock timing plate $5 Newer style tail light $10 Radiator shroud, blue, has scrathes $10 Gastank shroud, blue, has scratches $10

shipping will be about $25

Bump

Got some 501's on the way thanks anyway guys.

I know some of you mx guys want these tires. Open to offers.

Looking for some rear tires in good condition need them 20" tall for 9" rims. Send pics of what ya got to [email protected] or post them on here. Can pay via paypal.

These are just the tires not the rims.

Just the rears.

This is a near new set of holeshots, the edges of the cleats are rounded off a bit but that's it, probably an hours worth of ride time on them. They are the MXR6, size is 18x10x9, looking for $100 plus shipping.

What kind of dyno did you run on, same as a car dyno or was it like a motorcycle dyno? I've been thinking about doing mine but wasn't sure on what kind of dyno to run on. I was also wondering why the bike wouldn't just spin on the roller? Looks like it wouldn't be enough weight for the roller load. Anybody dynoed their's in NC?

Bought some vf3's, came as described, quick shipping, thanks bud.

Na still got the carbs though.

Alright so I get my pipes in today, get em on, fire it up, starts first kick, yeah I got a big ass smile now. Then I run it up a short path a couple times, bring it back and there's a tinging that isn't normal, really thought it was a bearing to start with. So then I tear the topend back off and one piston is gauled up on the intake side, wtf!? So then I notice this piston has more clearence then it should, break out my calipers and the piston is .009" undersize, these are 65mm pistons that came in a topend kit, the good one measures 2.556 which is right and evidently this is the one I used to check my clearence when I honed the cylinders. Nope I didn't measure the other piston like a dumbass before I put it on but it measures 2.547 at the bottom of the piston on the good surfaces, it doesn't have any taper from the rings down like it should have and I guess that little extra rocking got it snagged on the intake ports and gauled it up. Has anybody else ran into this problem and do you think wiseco will send me another piston since they sent out a bad one.

Just get ya some Klotz and mix 4 ounces of oil to 1 gallon of gas. That's 32:1, I actually put a little more like 4.5 ounces to be on the safe side. Klotz is one of the best premixes out there so you can run less oil in your gas and still get good lubrication.

I need some shearers guys BADLY have $ ready to send right now.

I need some shearers guys BADLY have $ ready to send right now.

$40 shipped