-
Posts
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by sykoman
-
-
any pics of the clutch basket?? please send to sykoman32@gmail.com
Here we go ::
Trinity Stage IV 2-1 carb Setup $275 shipped
Complete Tranny $120 shipped
Flywheels $65 shipped
Wiseco billet Clutch Basket $100 shipped
Complete Stock clutch Setup with Fibers, plates, springs and Hub $80 shipped
Casses $175 shipped for Mint ones no chain wacks
Candy blue Front hubs $55 shipped
Stock Bore Cylinders
Complete front brake setup $50 shipped
Complete Rear Brake setup $80 shipped
Rear Shock $75 shipped
Stock CDI $60 shipped
Front Hubs $40 Shipped
Rear Hubs $50 shipped
Billet Reed Spacers $17 shipped
Stock reed, Boost Bottle and Intakes $45 shipped
Pro Taper Fat Bars $35 Shipped
Stock Front shocks $50 shipped
Stock Carbs Jetted for T-5 $80 shipped
Ac Pro Pegs with heel gaurds $200 shipped
Lonestar +2+4 Chrome Axle $175 shipped
Yamaha GYTR cdi $90 shipped
Billet Amplink $80 shipped
Tons of other stock parts available
Local Pick up Items:
Like New ITP Mudsharks
Holeshots Fronts on Polished ITP RIms
All parts are OBO......
-
can u send pics of the arched +10 to sykoman32@gmail.com
-
what did that master tech stuff tell you about the cranks?
there is a nice write up starting on this very subject..
Nothing.... besides basic runout measurements. That's y I posted on here, just something that I want to go to be willing to learn....
been keeping my eye on the crank rebuilt walkthrough.... nice
-
guess I'm not your average addict.... lol..... Actually I'm a master certified auto tech with a banshee addiction so I don't mind learning how its done.... Thanks guess I'll be spliting it again or taking to metal tech here in Gendale
-
-
nothing to do with ur q but why long rod on stock stroke?
Kin of a long story but to make it short I ended up with a pair of 66.25 blaster pistons in stead of banshee so decided to make it a 370 long rod
-
I just seperated my wiesco crank to put a set of long rods on.... I trued each side from 1 1/2 - 2 thousands but now when I set the crank in the lower case half and spin it I see movement in my two center bearings.... Looks like the come together then back apart at least twice during a full revolution..... How do I adjust that? I never seperated the center just the outers?? Any experianced advise would be greatly appreciated! Thanks ahead.....
-
Sand drags coming up this weekend who's going??
-
check planet sand arizona tab clown racing will post bulletin,might be too windy, i went last sunday in hopes to see a crowd, everyone had family plans RATV... i had to settle on racing a stock piped shee , and yfz450r said he had big bore beat him by two bike lenghts
I was looking on planet sand but didn't see anything but have a hard time navigating on that site?? I was out @ hassy around 9:30 or so only a few people were out more showed up in the after noon..... pretty good turnout for not knowing if anyone was gonna be there or not. I'll probably be @ ACP next even which I here is in 2 weeks....
-
Anyone planing on heading out to hassyampa tomorrow??
-
Just curious if any drags going on this weekend? Any one hearing anything?
In phoenix?
-
Just curious if any drags going on this weekend? Any one hearing anything?
-
I just put a 2-5 in mine..... wow what a differance. I am concerend with bending shift forks so I am very careful in down until my speed is comparable to the gear Im going in.....
-
CAM sounds bout right.... sounds like a #2 shift fork and probably worn gear.... Been there before, installed shift fork the first time, shift fork and drum the second time before finally replacing the gears and shift fork for final time..... Good luck
-
Interested in the chariot head if still available.... any pics?
-
Any pics? Who set them up?
-
How much for 1-5 trans shipped to 85303? Is shift drum included?
-
Also i am willing to take a descent set of stock jugs with pistons plus cash for these.
I have a set of 64.5 stock cylinders and head unported with 65mm wsm pistons... let me know how much shipped to 85303 with trade
-
Nice I wouldn't mind both.... any clue on shipping to glendale az and total price for both.... now I have a +4 with a lonestar carrier which moves the caliper on top.... I'm using a stock line but it's a lil too long would this -2 brakeline be what I need??
-
1) What type of aftermarket exhaust do you have?
FMF fattys w/silencers
2) What type of airfilter do you have?
foam
3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all
bstock box vented lid and proflow intake
4) What is your elevation? (If you don't know, go here: http://www.topozone.com )
1100ft
5) What size pilot jets are you using?
30
6) What size main jets are you using?
340
7) What temperature is your Banshee jetted for?
phoenix
8) Do you have a port job?
not yet
9) What kind of carbs?
stock
10) What size carbs?
26mm
11) stock reeds w/ aftermarket petals
-
You might try applying the choke @ full throttle and see if it get better or worse.... if it gets better jet up if it gets worse jet down...... just my .02....... Oh yea and new plugs for sure!
-
I bet someone has it and grinded numbers off, changed plastics and shit....man that sucks.
I caught someone that was about to roll mine outta the bed of my truck into theirs. I bought the most solid chain I have ever seen, and now that shit gets locked and wrapped around my damn truck axle and through the frame and shit.
Other than that, it's high security in my garage.
I know I had a kryptonite cable with a lock on it wrapped around my carport.... thought it would be Ok for one nite..... so much for that!!!!
-
just keeping it fresh.....
-
I have a very nice set of rims and tire off my 03 monte carlo.... imaculate condition.... I can send better pics if needed... My banshee was stolen in August and just can't afford to buy one cash but willing to trade plus some cash if needed..... running or not.... let me know what you got!
Thanks
Jeremy in Phoenix
(623)695-9329
4mil part out
in For Sale - Parts & Accessories
Posted
how much for basket shipped to 85303