banshee24

I am not really sure on what to ask. it was not cheap to build but there are not alot of comparable engines for sale to get an idea

anyone interested

thanks alot

hey i am thinking about selling my engine to upgrade to something bigger. i on;y use this bike a few times a year so might as well go a bit bigger. the engine was built by ct racing. bottom end is still stock has a trued and welded crank in it. ct 73mm monoblock cylinders with some mild porting, billet intakes, would come with the polished covers jsut wanna keep the carbs and pipes. compression was 170psi in both holes and i always ran race fuel in this engine and full synthetic mix. only has 2 short seasons on the engine a few rides each year. I am not really sure what i should ask for the engine but throw me some offers and we will go from there. not the best pics but have not pulled it out of the bike yet.

i have a set of ct racing pipes that were on my banshee when i bought it, went to a set of shearers. i rode up the street and these pipes definatly pull hard. thay are a fat pipe and are painted silver, come with head pipes and silencers. the left pipe had a little dent in it on the inside to clear the jugs no effect on performance. wanting $275 shipped for everything.

magellan explorist gps brand new in the box for 9.99 works great also got a set of propegs with nerfs for my girlfriends bike for $44 but those are the only real deals in well over 100 transactions.

putting these pipes back up for sale. ct racing inframe drag pipes. headers are painted silver silencers are chrome and aluminum. nice set of pipes. has a small dent where it had to clear the head on the left pipe not noticable when pipes are installed. I only ran these up the road when i got the bike. now completly changed my setup and need different pipes. they pulled hard all the way through lots of mid range. looking to get $275 shipped for the whole setup.

very happy with the parts i bought

make me an offer i am reasonable.

putting these pipes back up for sale. ct racing inframe drag pipes. headers are painted silver silencers are chrome and aluminum. nice set of pipes. has a small dent where it had to clear the head on the left pipe not noticable when pipes are installed. I only ran these up the road when i got the bike. now completly changed my setup and need different pipes. they pulled hard all the way through lots of mid range. looking to get $325 shipped for the whole setup.

looking for some billet or chrome headlights something. perferably trail tech billet with the bashee mounts.

last chance to bid auctions end at 6:20 pm

one more day till the auctions end thought i would post them in the for sale section. ct racing inframe drag pipes http://cgi.ebay.com/ebaymotors/ws/eBayISAP...121381&rd=1 dynoport 2 into 1 pipe http://cgi.ebay.com/ebaymotors/ws/eBayISAP...123271&rd=1 pvl ignition http://cgi.ebay.com/ebaymotors/ws/eBayISAP...120287&rd=1

open to offers

open to offers

I am selling my ims desert tank and the front fenders that have been cut for the tank. still full fenders. tank and fenders are vitually new. have 2 rides on them very good shape. going a different route. $225 plus shipping the only pic i have is them on the bike.

I have a digitron dt32 egt temp monitor. this unit was on my bike when i bought it I am not going to be using it but everything seemed to function properly may need some new batteries just uses double a's. has both temperature probes and an option for tach i am not sure if you can get an adapter for a banshee but the option is there. oh and it also has the mount to attach onto the bar clamp. wanting $175 shipped.

ct racing inframe drag pipes http://cgi.ebay.com/ebaymotors/ws/eBayISAP...121381&rd=1 dyno port 2 into 1 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...123271&rd=1 PVL ignition http://cgi.ebay.com/ebaymotors/ws/eBayISAP...120287&rd=1

i am looking for a set of big bore in frame shearers. chrome. message me with a price.

would like to get more out of them than that after some calling and whatnot i found these are fairly pricey through ct and a pretty good overall pipe.

I have a set of ct racing inframe drag pipes for sale. they are in good shape. the left pipe has a ding in i to clear the head but can not be seen at all when mounted and does not affect the performance . these are nice pipes i took them for one quick run and they definatly make power they are a fat pipe. painted pipes and aluminum silencers. pipes look good. make me an offer.

after ALOT of searching last night i did find a little write up on these pipes they are ct racing in frame drag pipes I really do appreciate all the help i guess i should have investegated them earlier but was told they don't make pipes and it was just a sticker. I went for one run with this pipes and they make great power. I am running a 4 mill and a set of 72mm juggs now so want to upgrade to a shearer or maybe a cpi big bore pipe.

i tried looking up ct racing pipes but could not find anything. the guy i got the bike from said they were just stickers put on them. does CT actually make pipes?

pipes and silencers off bike

i will go take a pick of the silencer it is not an LRD the bend at the header is different. has round silencers