[The best web site]

Can anyone give me a web site that I can buy V-Force reeds from. I read a posting about 2 weeks ago that somebody had a web site that had really good prices but I didn't write it down and now I can't find it

Thanks

[V-Force 2s or V-Force 3s]

I'm about to order some reeds because I was told the performance is a HUGE difference. Is there really that much of a difference and which reeds should I buy???( 2s or 3s and why)

Appreciate any help.

[Needle clip position?]

Thanks for all the info!!!!!!!!

[Needle clip position?]

I have the same pipes, and tried different clip positions, but mine definately runs best in the middle. As for the pilots, if it does'nt bog or stall taking off from a dead stop, and your airscrews are 1.5 turns out, you'll be ok, a 27.5 would work, but might be too rich in the summer time.

351106[/snapback]

What are running for mains?

[Needle clip position?]

Yeah your probably right. I bought it used w/the PC pipes & reeds and it use to bog off the line and miss when I was on the pipe. I found the jets were stock and the air scews were out 2 + turns out. I changed main to the 260 and went 1.5 turns out and it runs real good ------ I want more out of it!!!!!

[Needle clip position?]

I called Pro Circuit and they said to use 260 so I did and it runs strong but it seems like I maybe a little lean compared other bikes---------I guess I should do a plug chop to know -- Just wish I had the time!!!

[Needle clip position?]

You need to play with the needle position. YOu may find one clip position to be much more responsive than on someone elses. They are not all the same. Most people try to stay stock but a lot of people find there is still a lot of tuning that can be done.

350632[/snapback]

Thanks - What do you think about the 30 pilot vs. the stock 25 --- Also after reading alot of guys settings I'm thinking about bumping up my mains from a 260 to a 280 maybe a 300 if I get rid of the lid ---- What do you think???

[Needle clip position?]

sea level

350331[/snapback]

 

sorry for the incomplete reply - I'm in Mass. sea level I believe 32:1 - 40:1(927) Is the stock setting 3rd position?

Thanks

[Needle clip position?]

what is the elevation? I would say start from the 3 clip from the bottom if your around 5000 ft.

350327[/snapback]

sea level

[Needle clip position?]

Could anyone recommend the correct needle clip position for my 03 shee w/PC pipes and silencers,reeds,260 mains and 25 pilot? Also I have a 30 pilot but she runs fine - would the 30 improve my low end??

Thanks for any help!

[Explain differnt port jobs plz]

Would any of you atempt to port it on your own?

[Big difference or no difference?]

350255[/snapback]

I think Igot this reply thing down now

You already answered - Thanks

[Big difference or no difference?]

Thanks for the info! What about the exhaust side?

350250[/snapback]

[Big difference or no difference?]

Thanks for the info! What about the exhaust side?

[Big difference or no difference?]

Hello - 1st time member & post

I've been given an intake that is ported. My bike runs real good right now, but like all of us I'm always game for more power.

Would anyone take a chance not knowing how much was actually ported??? Also he didn't polish it - does it make a difference?

Thanks