Jump to content

chase73

Members
  • Posts

    346
  • Joined

  • Last visited

Posts posted by chase73

  1. LOL I was just looking throug a magazine and thought I would share with all off you what I saw. Its a new kit to make your sled a quad !!!!! believe it or not !!! think about it how do you try to compete with a 1000cc fuel injected stock 180 hp quad/sled out off the box ???????? and then its clutched and its automatic !!!!!! well its comming here is the link to the website to check it out

     

    sled conversion kits

     

    skidoobc_copy.jpg

     

    yamahaleft.jpg

  2. Well it could be a few things but , first off if u are think the top end is gone its pretty easy to test this all ya need is a compression gauge and if u dont have one they are available at a the auto part store for 20 bucks or so and make a valuable addition to any tool box . Check your compression if its a stock ride the #,s should read 120 # or so and check both cylinders they should be within 10# off each other . after you figure out if the top end s good or not let someone here know the answer and go from there good luck

  3. LOL i havent been here n a whle and told myself i wouldnt post again but , last tme i was here i kinda said the same thing ! well i relzed that as the site grew it lost a lot off ts charm I am not sure exactly what meber # i am but , I do remember there were some pretty cool people here that are gone So when the next coalfeast :) LOL if you were around then you wll know what am talking about " Meat we have to get that rde gong atleast one more time " OHHHHH and P>S logato that quote you have on the bottom off your signature about beong a big bad moderator defintly needs to go :bolt:

  4. but a lot of ppl use a dyno to tune thier carbs for winter, summer, trips to diff areas, ect.

     

    how nice would it be to set it up like you want it then leave it. For the most part most wont ever touch the mapping

    431723[/snapback]

     

    they do have something right now that is available for sleds and i am sure it can be used for atv its called holtzman tempa flow it is a device that after you jet a machine the way you want it you install the tempa flow and it will compisate for tempature changes and altatude varations . its pretty sweet not need to rejet just set it and forget it :) as ron po peel would say

  5. Ok, I'm a dick..  READ ALL of this post he made a year ago, and here he

    is wanting to start shit with people AGAIN.

     

    READ <-----

    427430[/snapback]

    LOL ok looks like I have 2 fans here stclark the dipshit and banshee04 his gay lover!!!! lets clear this up obviously you are not the people I was looking for to reply to this topic/post I was looking for some of the old crowd that used to come on this board . You and you buddy Clark st shithead are not them so @#$% off .You have any issues I am not one to play Keyboard tough guy but if ya wanna come see me I would enjoy da sha vuing you a new smile :angry: OHHHH and the post from last year I guess I came here a year ago and noticed the same shit .Hey I understand there is a whole new crowd here I just wanted to see if the old ones were still kicking around .For the gay comment as to still being the shznit around here 1!!!!!!! Please kid I have more knowledge in my brain farts then you have possessed over your entire life !!!!!!! Hey loco do me a favor and delete this post I don't want to tarnish my rep as king dog around here and with all my fans I couldn't stand disappointing them .

  6. Nyuk your right times do change and priority's change I myself havent looked at the this forum agian until a few weeks ago and that was only to see what Jason (AKA)Banchetta was up to havent seen him since coalfeast I have only riden my banshee twice this year LOL Getting old :) but, I see all the new names and no old school members are around anymore kinda sad and man I read the recent posts here and to all the newbies USE COMMON SENSE uhhhhh should I tighten the chain if its loose ????????? LOL oh well I wasnt trying to stir up the post whores just tried to get a few of the old school members who probally dont post anymore to reply :) I will be back again next year I hope !!!!! :notworthy:

  7. Strange but interesting.

    I couldn,t attach this so I put it in my gallery for you to watch, it will get you ready for Halloween.

    This is a car advertisement from Great Britain. When they finished

    filming the ad, the film editor noticed something moving along the side of the car, like a ghostly white mist. They found out that a person had been killed a year earlier in that exact same spot.

    The ad was never put on TV because of the unexplained ghostly

    phenomenon.

    Watch the front end of the car as it clears the trees in the middle of the screen and you'll see the white mist crossing in front of the car then following it along the road....Spooky!

    Is it a ghost, or is it simply mist? You decide. If you listen to the ad, you'll even hear the cameraman whispering in the background about it near the end of the commercial.

    A little creepy but pretty cool! if it dont load right click and save file as

     

    car video

  8. hey if you are really serios about trading I have a modded 00 she its a 4mm stroker built by dan from patroit racing works triple rated jannsen +2 a-arms powderecoated frame -2 round hosing shortend swingarm pro circuit pipes new mudsharks in rear and bandidts in front 30mm keihnb flatsides and a ton more just let me know if you are for real I am selling bike for 5500 or bo just listed in local paper yesterday but will trade with clean title and we are pretty close

  9. Hey all i live in mass and I am looking to trade my banshee for a streetbike preferably a cruiser I dont want any old junker so please dont bother if its a beater

    2000 yamaha banshee

    patroit racing built Race spec 4mm stoker

    new 4mm trued /welded wisco crank

    hinson clutch basket and brand new dirtdiger clutch

    K@n filter with outer wear

    30mm flatside carbs

    -2 swingarm with round honda style billet carrier

    ac propeg nerfs

    new mud shark rear tires with edge extended rims

    front bandits

    renthal bars and biller clamps

    powdercoated frame /swingarm has some chips from riding

    noss coolhead with stroker domes

    pc pipes and 304 tips

    Jansen+2 a-arms

    works triple rate shocks with resies

    trinity timing plate

    lots of other stuff just cant list it all If anyone was at the last coal feast they know the bike its a dam fast ride new top end

    runs race fuel let the offers begin :) I am selling it outright if I cant find a trade

  10. just to help you sell it a 370 uses 80 over pistons not 20 over. I think 20 over is a 355?

    290230[/snapback]

     

    hahahahhahahha 370 hahahahahhahah thats some funny shit I hope you didnt do the engine work if you that it was that easy to get a 370 if it was it would be on its last couple bores or have new sleeves :)

     

    hey this is from yor website

    stock is a 350 2 stroke twin clocks out at about 75mph or so but iv had this one cocked out at 97MPH!!

     

    since it cocks out :) at 97 mph whats the gearing in that bad boy and does it have honda rear setup to get the spoket on to make it go that fast ....hahahahhahahahahhaha I call this one BULLLLLLLLSHIT

  11. monster land ???????????? is this a track or somthing ????? I never heard of it and I live in mass and have ridin almost all off the good spots . Is it big hills does it compare to Dayton up in banchetta neck of the woods ?????? lets hear about it I would be glad to hook up and go riding if its worth it

  12. meat , are we going to be able to set up another ride like last years coalfeast . I would love to get out there again and I am sure Jason and the others feel the same . Is it cool with the police yet

    ???????

    if so sometime next year when weather is nice again!!!!

    Ohhhh does anyone ride ther in the winter on sleds that would be the shit hitting going up that on a sled instead of the bashee

  13. the 2007 mustang will be the shit they are saving all the best for shelby retiring if you have seen the new stang it does not have the side scoop or the ram air hood and the engine manafold is just beat looking I was at the dealer looking at it and was talking to him for a while . The word is they are saving the best for last !!!!!!!!!!!!!!!!!!

  14. OK the oil stinks because you burnt the clutch and most likely if it is smelling that bad you fried your friction plates so do yourself a favor and get some new ones and align the clutch up correctly and put in all the heavy duty springs I had a issue with sliping with just alternating the springs its a little hard to pull but u get used to it also try using the clutch saver oil by spectro its pretty good stuff but, any decent oil will do . You are making a decent amout more HP with the new engine so do it right and you will be happy !!!!!!!!!! OHHHHH P.S replace the metal plates as well :)

×
×
  • Create New...