vdubn Posted July 1, 2009 Report Posted July 1, 2009 (edited) I just got this things totally built, and took it out for a great maiden voyage this last weekend. I have decided that rather than spend more money on this bike, I am going a totally different direction. The best way to recoupe most of my money, is to just part this thing out, so here is the list of parts with prices, along with a bunch of pics. Most of this stuff has very little time on it, and as like new. If you have any questions, especially for shipping, its probably easier to shoot me an email at [email protected], as the PMs on here require that I wait 10 minutes between each message I respond to. All prices below do NOT include shipping, unless I state it next to the price. First person to sent paypal, is the person that gets the item. I can't do the dibs game as it just holds things up for others. I will post immediately in the thread as stuff is sold, and will update the list with follow-up posts, so people know what is available. I respond quickly to my emails and to posts here, and have perfect feedback through Ebay. Ebay username is bvamotorsports, feel free to check the feedback before you buy. - Keihn 35 PWK Airstriker Carbs - $300 (these are like new with polished caps and a throttle cable is included) - Shearer SB In-Frames - $400 (includes the billet frame clamps and stinger clamps shown, repacked, and totally rechromed. These are a bit blue by the head, but as you can see are in excellent condition. I just re-pop-riveted the mufflers, but they are still a bit loose) - Pro-Design Billet Pegs (like new) - $90 Shipped - Laker Plastics (race cut front and rear black, literally have one weekend on these, they list for over $500) - $350 - Powder Coated Frame w/title (Candy Purple over Silver, just coated a month ago) - $400 - Purple Powder Coated Front late model Spindles that match the frame - $75 - +10 Metal Tech Rear Swing Arm (one run on it, chromoly setup for stock rear linkage, Gloss Black Powder Coat, over $600 into this) - $400 - +2 Wider, +2 forward Metal Tech Front A-arms, with tie rods and brand new Tie Rod ends (These were $460 + $60 for Powder Coat, and $50 for the new tie rod ends) - $375 - Rear Shock, based on 2002 Stock shock, rebuilt and revalved by I-Shock, with Eibach H.D. Spring, Powder coated candy purple. Setup for 190 and up lbs rider, for +8 and over swing. 1 hour on this since rebuild - $375 - Front Works Tripe Rate Shocks with reservoirs, these have 1 hour on them since rebuild/revalve (Rebuilt and revalved by I-shock, for +2 wider A-arms, for 200 lbs rider) - $350 - Tail light with billet Biohazard cover, and OHV Tag holder - $40 Shipped - Stainless Brake Lines (setup for +2 front A-arms, cost $80) - $50 Shipped - Front Calipers - $50 (bead blasted clean, off of a 2002 Banshee) - Polished stock Clutch Cover with Billet/Smoke Plexi-Cover (less than 1 hour of ride time, with ProDesign water pump cover, billet dip stick, all new bearings and seals, etc.) - $200 - Mattoon Lockout Clutch Assembly with allen bolts (less than 1 horu of ride time) - $50 - A/C Front Bumper (straight) - $50 - A/C Rear Grab Bar (straight) - $40 - ProDesign Billet Shifter - $40 - Billet Stator Cover (Cascade with BioHazard design) - $150 - Virgin Banshee Cases (small rub marks from a loose rod in the original motor, had them checked out, and they are in excellent shape, no broken issues around the chain, no stripped threads, etc.) - $125 - Trail-Tech 1-1/8" Low Bend Silver X-bars (with Oury grips) - $40 - Trail-Tech Vapor Computer (speed sensor still in the package, this has about 2 hours run time on it, includes temp sensor and all leads, box, and instructions) - $100 - Trail-Tech Banshee 1-1/8" clamp with Vapor holder - $50 - LoneStar Billet Front Hubs (like new, less than 2 hours on these) - $225 - Stock Banshee Front Hubs with early spindles - $50 - Ported .080 over jugs (outside polished), Drag Ported by Havoc (includes Weisco Pistons, excellent shape) - $300 - Brand new NOSS Cool Head with 20cc Domes (bought last week, may return in no one wants to save the $50 extra I spent) - $175 without domes, or $200 - JJ&A Rear Drag Axle, Play axle, 40mm (34" I believe, excellent condition, $660 new) - $400 - Fireball Racing 40mm Rear carrier & Caliper kit (new bearings, this thing has less than 2 hours run time on it) - $125 - Stock Kick Srarter, tight, no rattles - $45 - Ricky Stator - 200w $150 Shipped (for 95-up Banshees) - ProDesign Timing Plate - $30 shipped - Ricky Stator Headlights - Duner Setup (like new, 100watt bulbs, cost me $180 plus shipping) - $150 Shipped - Sidewinder Xtreme Chain with Titanium Sprockets - LIKE NEW (this setup cost me over $500... I know, I was an idiot, but it is a great setup. 14tooth front, 41 tooth rear) - $200 for everything, less than 2 hours on the setup - Gas Tank with new Petcock - $40 - Mattoon Billet Clutch Basket (can use up to an 8 plate clutch on this drum, less than 2 hours on this, new pads with gear, etc.) - $125 - Fresh Banshee Transmission (Dune cut by A&S, not an Override, just a great shifting setup for Duning, cost me over $400) - $250 - Front Smooth Buff Tires/w-ITP Wheels - $120 - Billet Aluminum Steering Stem (Like new, less than 2 hours on it) - $150 - Polished Rear caliper and +10 over brake line - $100 (shipped) Pics are coming in the follow-up thread Edited July 1, 2009 by vdubn Quote
Banshee215 Posted July 1, 2009 Report Posted July 1, 2009 How can i buy the cylinders? can we use paypal? Quote
vdubn Posted July 1, 2009 Author Report Posted July 1, 2009 (edited) How can i buy the cylinders? can we use paypal? These Havoc ported cylinders, pistons, and head were bought right after I posted this, but I have another set of pistons/cylinders for sale, outsides are polished as well, ported with a dune port, bored to 66.5mm (uses Blaster pistons, has boost ports, and are Nikasil'd). These come with domes setup to run with 4 mil crank, domes are 19mm. They say 22mm on the side, but we confirmed that 22 includes the largest area of the dome, not the squish area, so we measured them at the 19mm range. Nikasil is in good shape, just bought these to put my 4mil up to a 397cc motor, and decided to end the project. The pistons are in good shape, with only 5 runs on them. Worse case, just need rings. This setup can be run as is with a 4mil crank, no spacer needed. Forgot to post the price: $275 shipped for everything you see. Here are some pics: Edited July 1, 2009 by vdubn Quote
trademark Posted July 1, 2009 Report Posted July 1, 2009 dibs on foot pegs were to send money and total Quote
vdubn Posted July 1, 2009 Author Report Posted July 1, 2009 dibs on foot pegs were to send money and total $97 shipped within the lower 48 states, and paypal is [email protected] Quote
vdubn Posted July 1, 2009 Author Report Posted July 1, 2009 Sorry, I had already said $90 shipped, my mistake. So, if you want the pegs, just shoot $90 to [email protected] Quote
Badasshee Posted July 1, 2009 Report Posted July 1, 2009 $97 shipped within the lower 48 states, and paypal is [email protected] is the pingel stock or the dual outlet one? if daul i got dibs on it. o and cani get some pics of the basket? u said it comes with the primary drive gear on it with new cushions correct? PM sent! Quote
vdubn Posted July 1, 2009 Author Report Posted July 1, 2009 is the pingel stock or the dual outlet one? if daul i got dibs on it. o and cani get some pics of the basket? u said it comes with the primary drive gear on it with new cushions correct? PM sent! I sent you pics of the basket, it is new with new cushions, with less than 2 hours run time on it. The petcock in the tank is stock, single, sorry. Quote
Jokerzwild Posted July 1, 2009 Report Posted July 1, 2009 How much for the pipe hangers and all the bolts that hold the gas tank and all the plastics shipped to 92563 Quote
vdubn Posted July 1, 2009 Author Report Posted July 1, 2009 How much for the pipe hangers and all the bolts that hold the gas tank and all the plastics shipped to 92563 The tank hardware isn't 100% stainless (just half of it), but all the rest of the hardware is. $40 shipped for the hangers and all hardware. Also, $375 shipped for the Shearers without the hangers and clamps. These have new O-rings in them too. Quote
Jokerzwild Posted July 1, 2009 Report Posted July 1, 2009 Pm me your name and address ill send out a money order in the morning I won't use paypall thanx Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.