07NMbanshee Posted August 14, 2008 Report Posted August 14, 2008 Ok everyone i have a 00 banshee with a fresh rebuild that needs to be jetted badly, try reading the plugs help from other people and take their advise but it just gets worse. Heres what i got: -.80 bored with vitos super stock pistons -custom ported cylinders -4mm stroker crank -vitos hemi head 2 w 17cc domes -vitos aluminum intake manifolds with bullseye fins - NO boost bottle or pipe -vforce 3's -TORS eliminator kit -no lid intake w k&N -fmf gold sst -timing plate @ +4 5000' elevation when i got it back from my engine builder, drove it for 4 tanks during break-in process using motul 800 at 32:1 as soon as i got on it, my plug backed out so i figured it was either lean or lose. tightend it back up and went for another run and it made a hole in the piston. Got that mess taken care of and redid it myself and found it has 300 mains and the vitos needle on the middle clip. I went up to 330 it ran better but not right. got it on 360 and it just dosnt hit right. Please help im not too great wit this Quote
fastbanshee8 Posted August 14, 2008 Report Posted August 14, 2008 What do the plugs look like? That will help us tremendously. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.