TRO73 Posted August 12, 2008 Report Posted August 12, 2008 I'm installing my new A Arms and when I put on the tie rods the bolt that holds them on when I try and tighten the nut I get about 2 turns then the entire spindle turns so i cant tighten it up to get a cotter pin in? Of the 2 tie rods 3 ends are doing it and 1 is fine. Any thoughts on how to fix this. I cant see any burrs on the threads and I have tried several different nuts. I was going to try a tap and die to clean the threads "need to buy one" but thought the spindle would still turn. Quote
LiftdT4R Posted August 12, 2008 Report Posted August 12, 2008 Your ball joints areworn out then! Time to replace them. Hit up Rocky Mountain ATV they have a set of 4 tusk ones that are pretty beefy for like $20 or 25, I run them, and they work really good. Quote
Bansh-eman Posted August 12, 2008 Report Posted August 12, 2008 Your ball joints areworn out then! Time to replace them. Hit up Rocky Mountain ATV they have a set of 4 tusk ones that are pretty beefy for like $20 or 25, I run them, and they work really good. they arnt worn out, they are brand new. I am taking care of him, thats my Wicked arms he just bought Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.