sheeblue01 Posted May 25, 2008 Report Posted May 25, 2008 Who all has relocated the ecu? What is the little silver box next to it? Quote
moneybags Posted May 25, 2008 Report Posted May 25, 2008 The silver box is a voltage regulator. Quote
Flash and Flare Posted May 25, 2008 Report Posted May 25, 2008 I cut my mount off the sub frame and re welded it right under the rear gas tank mounts. F&F Quote
locogato11283 Posted May 26, 2008 Report Posted May 26, 2008 shortened my harness.. cut off the bracket and welded it up front. Quote
Flash and Flare Posted May 26, 2008 Report Posted May 26, 2008 shortened my harness.. cut off the bracket and welded it up front. I like that better than mine. Might have to move mine again when I tear it down. How much of a PITA was it to shorten that wire harness ? Quote
locogato11283 Posted May 26, 2008 Report Posted May 26, 2008 I like that better than mine. Might have to move mine again when I tear it down.How much of a PITA was it to shorten that wire harness ? it wasnt hard at all. got the clymers out and started cutting off all the tors bullshit, then the stuff for the lighting.. i think the whole thing is 4 wires. i also added on a little plug for my kill switch. works great. i dont have an on/off switch or anything on my bars. just a pro design kill switch to shut it off. its clean as hell. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.