fastbanshee8 Posted April 10, 2008 Report Posted April 10, 2008 I'm reading through this and now have a question. So can you get a 4mil long rod in stock cylinders?? Yes. Your best bet is to use the 795 series Wiseco pistons, for the added rod length, and have domes cut for the 4mm crank. Quote
GleasmJA Posted April 10, 2008 Report Posted April 10, 2008 thanks for the reply... i don't know why i didn't think of that when i posted. I knew that but some reason didn't sink in. Must have brain farted while i was typing that. Quote
fastbanshee8 Posted April 10, 2008 Report Posted April 10, 2008 thanks for the reply... i don't know why i didn't think of that when i posted. I knew that but some reason didn't sink in. Must have brain farted while i was typing that. It's no big deal. That's what makes this a great site. People helping one another. :thumbsup: Quote
Animalman294 Posted April 10, 2008 Report Posted April 10, 2008 Best banshee site on the web................... :biggrin: Quote
dajogejr Posted April 10, 2008 Report Posted April 10, 2008 Yes. Your best bet is to use the 795 series Wiseco pistons, for the added rod length, and have domes cut for the 4mm crank. And...in addition to the 795 pistons and cut dome or heads, get the porting on the cylinder matched as well... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.