2strokeme Posted April 4, 2008 Report Posted April 4, 2008 hey just got the 30 mm carbs in . is there anything i need to know before starting this project. According to yamaha dealer i have the right jet setups. Anything else i need to know. Also I noticed the fuel inlets look smaller than my stock fuel line......ANY HELP GREATLY APPRECIATED, I'M NEW AT THIS Quote
endofitall9 Posted April 4, 2008 Report Posted April 4, 2008 man here has to be like 500 threads on here about the same subject.. did you even use the search button....you gotta say whats done to your motor before we can even attempt to help you. Porting, Pipes,V-force, air box or filters....Ect. Quote
2strokeme Posted April 4, 2008 Author Report Posted April 4, 2008 (edited) yeah i know there is alot on here about carbs pal! Just wanting some additional info if anyone has it! Like the fuel tubes being smaller on the carbs, do i just buy an adapter or do they make a special one. Also do i just tie up the wires for the tors and it'll run or what? Told you im new at this. And sorry about no info about my banshee, thought it would show on the bottom. but here it is if anyone wants to give me jetting advice. :beer: 03 banshee black,red stock bore,port t6s,vf3s,k&n lid off, coolhead w/21s,+2 timing,rickystator 200w,and soon 2b 30 mm carbs. elevation is a little above sea level 100-150ft ALSO have 03 banshee for sale, check out forsale forums if interested thanks Edited April 4, 2008 by 2strokeme Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.