freddy Posted February 26, 2008 Report Posted February 26, 2008 hi i recently bored my cylindeers with trinity but they told me that i had to go to 66mm bore to get all the scratches out. but the problem is that i had already bought the kit on ebay and i bought 65.50 mm wisecos, so my question is can i by any chance run these with the 66mm bore or will this mess up my cylinders??? any input is greatly appreciated. thanks Quote
sheerider1026 Posted February 26, 2008 Report Posted February 26, 2008 no way!!!!!!!!!!!!!!!!! the cylinders are supposed to be bored to the pistons that are going in them,, if trinity bored the cylinders without supplying a piston kit, they are half ass!!! you are asking for big trouble if you put it together like that.. you will not have any compression.. Quote
freddy Posted February 26, 2008 Author Report Posted February 26, 2008 no way!!!!!!!!!!!!!!!!! the cylinders are supposed to be bored to the pistons that are going in them,, if trinity bored the cylinders without supplying a piston kit, they are half ass!!! you are asking for big trouble if you put it together like that.. you will not have any compression.. ok thats wat i figured, but just wanted to make sure so i guess im going to contact the ebayer who sold me these and try to exchange them . thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.