bansheejoel Posted January 19, 2008 Report Posted January 19, 2008 i have my t.o.r.s removed but noticed the lil black box by the left pipe is still pluged in will it affect anything or should i disconnect it thanks Quote
bansheefreak Posted January 19, 2008 Report Posted January 19, 2008 the wires go to the thumb throttle??? if so i pretty sure you cut them at the throttle and remove the black box.. but just cut them at the thumb throttle this will leave the hole there plugged to keep dirt and grime out of cable area.. Quote
Michael Jackson Posted January 19, 2008 Report Posted January 19, 2008 yea thats the brains of the operation, with that still plugged in, you wont be able to make your motor idle, even with the idle screws installed, unplug it and light it on fire Quote
bansheejoel Posted January 20, 2008 Author Report Posted January 20, 2008 hmm it seems to idle pretty good....this box directly above the left pipe is the right box isnt it? just want to make sure its not like the cdi box....thanks Quote
JJBYZ4x4 Posted January 20, 2008 Report Posted January 20, 2008 hmm it seems to idle pretty good....this box directly above the left pipe is the right box isnt it? just want to make sure its not like the cdi box....thanks Check your wiring harness. I dicked around with my shee having a problem with anything above idle and it turned out I had a short in my harness. If your parking brake switch is malfunctioning it will do the same thing. Idle but when you try to rev, it bogs and misses. If thats the case, disconnect the wire that comes off the clutch lever and see if it works. Thanks to all the guys on BansheeHQ for that little tidbit of info!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.