Jump to content

Recommended Posts

Posted

Hello all just gonna run this through you guys but I think I finally got it. Been fiddleing with this for a while whenever I had time. 2006 fmf fatties powercore 2 dual unipods due to no airbox when I bought it. right now I have 25 pilot 1.5 turns out, 290 main neddle middle clip. It runs crisper than ever and actually pulls on my arms when I open the throttle. Did a plug chop with 300 main and was a little dark so went to a 290. It has a slight skip right around third gear with the throttle just cracked to cruise around on (my street is a little busy when I did this so had to slow down a little. I live in florida sea level( if not below) hot as hell high humidity. 32:1 premix. Am I about average for my conditions. Mostly trail riding around here. rest of bike is stock.

Posted
Hello all just gonna run this through you guys but I think I finally got it. Been fiddleing with this for a while whenever I had time. 2006 fmf fatties powercore 2 dual unipods due to no airbox when I bought it. right now I have 25 pilot 1.5 turns out, 290 main neddle middle clip. It runs crisper than ever and actually pulls on my arms when I open the throttle. Did a plug chop with 300 main and was a little dark so went to a 290. It has a slight skip right around third gear with the throttle just cracked to cruise around on (my street is a little busy when I did this so had to slow down a little. I live in florida sea level( if not below) hot as hell high humidity. 32:1 premix. Am I about average for my conditions. Mostly trail riding around here. rest of bike is stock.

 

Did you actually get to WOT in 5th and 6th gear?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...