Banshee Part Out.

Lethaface · November 4, 2007

A-arms and spindles gone.. Will do a packaged deal on the cub set up.. Will include Cub cylinders, Stroker Crank, Cool head, pistons and domes for $1225 shipped plus paypal fee's.. Also will do $1600 + PP fees and include the tranny.

1. 421 68mm cheetah cub cylinders with pistons and wrist pin bearings $750

2. Hot Rods 4mm Longrod Crank like new 3 weekends on it. $350

3. Pro Design Cool Head with BB 18cc domes $170

4. RDZ 1-5 override with neutral down. PERFECT SHAPE! $400

6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100

8. Majic Performance Lockup and polished Lock up cover. $300

10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp

on K&N filters and a Dual Feed Pingel and dave moore super jets. $475

11. Trinity Stage lV intakes for 38-40mm Carbs Also comes with a extra set of boots that fit a

34-36mm carb. No issues like cracking or anything like that. $140

12. Complete Electrical system from a 99 banshee. Comes with stator with modded timing plate

all wires, Coil and a working CDI and wiring harness. Headlight harness was cut of for billet lights. $150

14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30

15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes

with a +6 stainless steel brake line. $175

16. Polished axle $70

17. Axle Carrier from a 04 with brand new bearings and seals. $45

18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40

19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw

masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics

and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a

trail bike. $300

20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it.

Comes with pan and good working latch! Paid 110 for the work alone. $120

21. Complete set of a-arms, spindles and tie rods. $120

22. Front and rear hubs. Good bearings and seals in the front! $70

23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front

brake Lever. $150

24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50

26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and

a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350

27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30

28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50

29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25

31. Polished stock kicker. No clanging or noises its still tight!.. $50

32. Stock Thumb throttle with polished Cap. Harness still attatched $35

33. Chrome Rear brake Lever and Shifter. VERY NICE! $60

34. KBC gunslinger helmet size XL. very good shape. $120

Edited November 4, 2007 by Lethaface

kawiking · November 5, 2007

why you guys parting out your bikes ?? you can tell you had alot of time in that bike !!!

BUMP... good luck with the sale.

Lethaface · November 5, 2007

Kawi, He was my only competition.. he parted out to get married so the closest bike was running 9.10's lol.. So i decided to just do a car project..

Few more things i didn't have pictures of earlier.

Sprocket and sprocket hub

Modquad bar clamp

Chrome Shifter, brake lever and kickstarter.

Trinity Stage lV intakes for 39mm carbs and extra set of boots for 34-36mm carbs

Lethaface · November 5, 2007