Banshee Part Out.

[zach45]

RIP to yet another beautiful bike.

[BANSHEE-911]

I WILL TAKE 7. Clutch set up.. This includes a barnett clutch system, Billet Clutch basket, Pancake bearing,

Toomey 100% stiffer springs. new clutch arm, and pretty much all clutch components $150

 

MSR CLUTCH LEVER AND CABLE

 

PM SENT

[Lethaface]

The clutch set up is pending payment. I do still have the MSR stuff and cable.

[BANSHEE-911]

The clutch set up is pending payment. I do still have the MSR stuff and cable.

REALY NEED THE CLUTCH SET UP RIGHT NOW IF DEAL FALLS THREW I WILL TAKE IT

[WinchedWolvy]

im interested in the swinger setup

[Lethaface]

Heading to work. If anybody has any questions give me a call at 1-931-787-4022.

[Lethaface]

UPDATED LIST OF WHATS LEFT.. Clutch cover and reeds pending.

 

 

 

1. 421 68mm cheetah cub cylinders with pistons and wrist pin bearings $750

2. Hot Rods 4mm Longrod Crank like new 3 weekends on it. $350

3. Pro Design Cool Head with BB 18cc domes $170

4. RDZ 1-5 override with neutral down. PERFECT SHAPE! $400

5. Perfect set of Cases no breaks and port matched to a cub $200

6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100

8. Majic Performance Lockup and polished Lock up cover. $300

10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp

on K&N filters and a Dual Feed Pingel and dave moore super jets. $475

11. Trinity Stage lV intakes for 38-40mm Carbs Also comes with a extra set of boots that fit a

34-36mm carb. No issues like cracking or anything like that. $140

12. Complete Electrical system from a 99 banshee. Comes with stator with modded timing plate

all wires, Coil and a working CDI and wiring harness. Headlight harness was cut of for billet lights. $150

13. Tony Dukas Racing Reeds on ported Cages. Comes with Reed Spacers and allen head bolts $75

14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30

15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes

with a +6 stainless steel brake line. $175

 

16. Polished axle $70

17. Axle Carrier from a 04 with brand new bearings and seals. $45

18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40

19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw

masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics

and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a

trail bike. $300

20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it.

Comes with pan and good working latch! Paid 110 for the work alone. $120

21. Complete set of a-arms, spindles and tie rods. $120

22. Front and rear hubs. Good bearings and seals in the front! $70

23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front

brake Lever. $150

24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50

25. Chrome 7/8" drag bars in good shape. $25

26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and

a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350

27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30

28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50

29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25

31. Polished stock kicker. No clanging or noises its still tight!.. $50

32. Stock Thumb throttle with polished Cap. Harness still attatched $35

 

And last but not least is the frame. It has just got back from the powdercoater last month. Has a 3 stage powdercoat on it. The base coat is powderchrome, the 2nd is a transparent Candy blue and the top coat is a sparkling clear coat. It looks wicked in the sun!. I do not have a title for this frame but i do have a bill of sale for it. Asking $450 shipped. Nice and straight with no stripped holes or anything like that. One of the upper plastic bolts had a bolt broke off in it and the PC'er forgot to take it out before PC. It is not visable but i still thoght it was worth mentioning.

[Lethaface]

Another UPDATED LIST OF WHATS LEFT..

1. 421 68mm cheetah cub cylinders with pistons and wrist pin bearings $750

2. Hot Rods 4mm Longrod Crank like new 3 weekends on it. $350

3. Pro Design Cool Head with BB 18cc domes $170

4. RDZ 1-5 override with neutral down. PERFECT SHAPE! $400

6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100

8. Majic Performance Lockup and polished Lock up cover. $300

10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp

on K&N filters and a Dual Feed Pingel and dave moore super jets. $475

11. Trinity Stage lV intakes for 38-40mm Carbs Also comes with a extra set of boots that fit a

34-36mm carb. No issues like cracking or anything like that. $140

12. Complete Electrical system from a 99 banshee. Comes with stator with modded timing plate

all wires, Coil and a working CDI and wiring harness. Headlight harness was cut of for billet lights. $150

14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30

15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes

with a +6 stainless steel brake line. $175

16. Polished axle $70

17. Axle Carrier from a 04 with brand new bearings and seals. $45

18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40

19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw

masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics

and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a

trail bike. $300

20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it.

Comes with pan and good working latch! Paid 110 for the work alone. $120

21. Complete set of a-arms, spindles and tie rods. $120

22. Front and rear hubs. Good bearings and seals in the front! $70

23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front

brake Lever. $150

24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50

26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and

a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350

27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30

28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50

29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25

31. Polished stock kicker. No clanging or noises its still tight!.. $50

32. Stock Thumb throttle with polished Cap. Harness still attatched $35

 

And last but not least is the frame. It has just got back from the powdercoater last month. Has a 3 stage powdercoat on it. The base coat is powderchrome, the 2nd is a transparent Candy blue and the top coat is a sparkling clear coat. It looks wicked in the sun!. I do not have a title for this frame but i do have a bill of sale for it. Asking $450 shipped. Nice and straight with no stripped holes or anything like that. One of the upper plastic bolts had a bolt broke off in it and the PC'er forgot to take it out before PC. It is not visable but i still thoght it was worth mentioning.

[Lethaface]

TTT.

 

Will do $725 shipped for the cub and $330 shipped for the stroker crank this weekeend!!

[Lethaface]

Another UPDATED LIST OF WHATS LEFT..

1. 421 68mm cheetah cub cylinders with pistons and wrist pin bearings $750

2. Hot Rods 4mm Longrod Crank like new 3 weekends on it. $350

3. Pro Design Cool Head with BB 18cc domes $170

4. RDZ 1-5 override with neutral down. PERFECT SHAPE! $400

6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100

8. Majic Performance Lockup and polished Lock up cover. $300

10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp

on K&N filters and a Dual Feed Pingel and dave moore super jets. $475

11. Trinity Stage lV intakes for 38-40mm Carbs Also comes with a extra set of boots that fit a

34-36mm carb. No issues like cracking or anything like that. $140

12. Complete Electrical system from a 99 banshee. Comes with stator with modded timing plate

all wires, Coil and a working CDI and wiring harness. Headlight harness was cut of for billet lights. $150

14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30

15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes

with a +6 stainless steel brake line. $175

16. Polished axle $70

17. Axle Carrier from a 04 with brand new bearings and seals. $45

18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40

19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw

masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics

and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a

trail bike. $300

20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it.

Comes with pan and good working latch! Paid 110 for the work alone. $120

21. Complete set of a-arms, spindles and tie rods. $120

22. Front and rear hubs. Good bearings and seals in the front! $70

23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front

brake Lever. $150

24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50

26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and

a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350

27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30

28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50

29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25

31. Polished stock kicker. No clanging or noises its still tight!.. $50

32. Stock Thumb throttle with polished Cap. Harness still attatched $35

 

And last but not least is the frame. It has just got back from the powdercoater last month. Has a 3 stage powdercoat on it. The base coat is powderchrome, the 2nd is a transparent Candy blue and the top coat is a sparkling clear coat. It looks wicked in the sun!. I do not have a title for this frame but i do have a bill of sale for it. Asking $450 shipped. Nice and straight with no stripped holes or anything like that. One of the upper plastic bolts had a bolt broke off in it and the PC'er forgot to take it out before PC. It is not visable but i still thoght it was worth mentioning.

[atvfreestylekid]

That HotRods stroker got bearings? Also, do you have the spacer plate for the stroker? I'm building a stroker. I need everything. I'm also very interested in that axle carrier to.

[Lethaface]

Yes it has bearings and it has been true and welded. It dosn't have the spacer as it was used with a cub. It is in all honesty like new. You can get the spacer from vito's. The carrier is off a 04 and has new bearings and seals in it.

[Lethaface]

Forgot to add this to the list..

 

Chrome Rear brake Lever and Chrome Shifter. Very good shape no rust or anything like that. $60 shipped

[Lethaface]

Also going to sell my LID. Very good shape size XL. Use KBC's guide to fitment if any questions.. Helmet is KBC gunslinger. It is in very good shape not beat up..

 

$120 shipped!

[Lethaface]

TTT..