Banshee Part Out.

[Lethaface]

Decided it will be much quicker to part it out. I do perfer paypal as i hate having people say they want something and having to hold it for nothing. I do ask that 3% is added to cover the paypal fee's.. With that said. I Will not be visiting the post office every day. I've decided that i will go every 3 days until everything is sold. I will give a discount on shipping if more than one item is purchased. All parts are from my VERY clean 99 banshee. I have really taken care of this thing. . So with that said. Here is what i have for sell.

 

 

 

 

1. 421 68mm cheetah cub cylinders with pistons and wrist pin bearings $750

2. Hot Rods 4mm Longrod Crank like new 3 weekends on it. $350

3. Pro Design Cool Head with BB 18cc domes $170

4. RDZ 1-5 override with neutral down. PERFECT SHAPE! $400

5. Perfect set of Cases no breaks and port matched to a cub $200

6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100

7. Clutch set up.. This includes a barnett clutch system, Billet Clutch basket, Pancake bearing,

Toomey 100% stiffer springs. new clutch arm, and pretty much all clutch components $150

8. Majic Performance Lockup and polished Lock up cover. $300

9. CPI Small Bore Out of frame Pipes in good shape. A couple inperfections on the undersides

but no dents or anything.. Overal a 9 out of 10. $400

10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp

on K&N filters and a Dual Feed Pingel and dave moore super jets. $475

11. Trinity Stage lV intakes for 38-40mm Carbs Also comes with a extra set of boots that fit a

34-36mm carb. No issues like cracking or anything like that. $140

12. Complete Electrical system from a 99 banshee. Comes with stator with modded timing plate

all wires, Coil and a working CDI and wiring harness. Headlight harness was cut of for billet lights. $150

13. Tony Dukas Racing Reeds on ported Cages. Comes with Reed Spacers and allen head bolts $75

14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30

15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes

with a +6 stainless steel brake line. $175

 

16. Polished axle $70

17. Axle Carrier from a 04 with brand new bearings and seals. $45

18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40

19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw

masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics

and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a

trail bike. $300

20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it.

Comes with pan and good working latch! Paid 110 for the work alone. $120

21. Complete set of a-arms, spindles and tie rods. $120

22. Front and rear hubs. Good bearings and seals in the front! $70

23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front

brake Lever. $150

24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50

25. Chrome 7/8" drag bars in good shape. $25

26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and

a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350

27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30

28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50

29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25

30. Billet Headlights. Good Shape! $30

31. Polished stock kicker. No clanging or noises its still tight!.. $50

32. Stock Thumb throttle with polished Cap. Harness still attatched $35

 

And last but not least is the frame. It has just got back from the powdercoater last month. Has a 3 stage powdercoat on it. The base coat is powderchrome, the 2nd is a transparent Candy blue and the top coat is a sparkling clear coat. It looks wicked in the sun!. I do not have a title for this frame but i do have a bill of sale for it. Asking $450 shipped. Nice and straight with no stripped holes or anything like that. One of the upper plastic bolts had a bolt broke off in it and the PC'er forgot to take it out before PC. It is not visable but i still thoght it was worth mentioning.

 

Edited November 2, 2007 by Lethaface

[Lethaface]

[Lethaface]

[/img]

Edited November 2, 2007 by Lethaface

[bansh4mil]

pm sent

[Lethaface]

replied

[bansh4mil]

replied back

[Lethaface]

Back to ya .. Forgot to mention i work weird hours so if anybody wants to ask me a question or needs to get ahold of me feel free to call me at 1-931-787-4022 I'm normally up at 9am and awake till about 1 am.

[bansh4mil]

Thanks for the pipes

[Lethaface]

NP, thanks for the quick payment!

 

 

As mentioned PIPES SOLD!@

[badshee]

Hell of a guy and seller... sweet ass bike.. letha will hook you up and take excellant care of anyone... good luck letha

[wacko2000]

Interested in axle,sprocket and hub... pm sent

[Lethaface]

PM's returned.

 

Also forgot to add to the list.

 

Brand new billet gas cap from majic performance.. It is pictured above. $45 shipped

Double wide foot pegs. Very clean painted flat black. $40 shipped

[highroller355]

is the +6 swinger for a round house

[Lethaface]

No glad you mentioned that bro. It's for a stock carrier.

[Lethaface]

Fixing to go hang out with the Ol lady. If anybody needs anything or has any q's give me a call. I'll be up about 3 more hours.

 

Thanks, Jeremy