peterlocal22 Posted June 7, 2007 Report Posted June 7, 2007 I ordered some cascade pipe clamps for my Toomey T5's. Just got them in the mail but the package says there for SHEARERS. Do Shearers and T5's both run the same size pipe clamps? Thanks for any help. Quote
06BaNsHeE Posted June 7, 2007 Report Posted June 7, 2007 I got mine yesterday and they said shearer too but I ordered them for shearers.Call them up and ask them Quote
DGFUNNY70 Posted June 7, 2007 Report Posted June 7, 2007 I ordered mine from rocky mountain atv and the package said t4 t5 on it that may not mean much though. Make sure you install them on the right sides if you look at the clamp they have a lip on the inside and that should go towards the rear the larger opening towards the front. I tryed to put them on the wrong way and I was like this aint f**king right so I called cascade they filled me in on it. Other than that use some dish soap on the rubber hose and you should have them on in no time. I've had other clamps and in my opinion I think these look the most trick. Quote
peterlocal22 Posted June 7, 2007 Author Report Posted June 7, 2007 does anyone have a set for the t5's that they can get some measurements off of so i can then go measure mine? thanks Quote
peterlocal22 Posted June 13, 2007 Author Report Posted June 13, 2007 just to let everyone know whose buying pipe clamps in the future for shearers or t5's, jeff at f.a.s.t. and a sales rep at cascade inov. both said that the shearer cascade pipe clamps and the t5 cascade pipe clamps are the same exact clamp. Quote
dajogejr Posted June 13, 2007 Report Posted June 13, 2007 I used the ones from my T5s and they were a TAD tight, but not much when I put 'em on my Shearers....they should be fine to use. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.