lean or rich

[highroller355]

ok it now idles high with out choke and bogs and stalls the second i give it gas, now on choke idles normal and revs good but under a load stalls

[highroller355]

my mods

396-398 cc

4 mil long rod

aggressive port

head milled 25 thousandths

175 psi each cylinder

33pwks

48 pilot

165 main needle 3rd clip

110 oct mixed 32;1

shearer inframes

k and n pods

timing +5

[locogato11283]

check your other thread. you need to start looking at other possible problems. that jetting should be fine to get it started and running. the main might be a little rich, but it still shouldnt be doing what its doing. are you getting good spark??

[rhuebner]

check your other thread. you need to start looking at other possible problems. that jetting should be fine to get it started and running. the main might be a little rich, but it still shouldnt be doing what its doing. are you getting good spark??

I had that same problem and it ended up being the electrical connection that hooks to the parking break, I just completly disconnected it and it ran great. that might be it