kylechs04 Posted April 10, 2007 Report Posted April 10, 2007 Alright i have a pair of works dual rate shocks with remote resivoirs and they are tooooo soft for my +2 a arms????? Is their any way to get them reworked or stiffer, anybody had this problem or am i just screwed? Quote
ClimbAnyHill Posted April 10, 2007 Report Posted April 10, 2007 Are your A Arms & Shocks both standard size or both long travel? I don't have those shocks but you have controlls to controll the pressure & you can tense up those springs. Quote
kylechs04 Posted April 10, 2007 Author Report Posted April 10, 2007 Are your A Arms & Shocks both standard size or both long travel?I don't have those shocks but you have controlls to controll the pressure & you can tense up those springs. The most i know about the a arms is that they are ricky stator a arms +2 and they have the larger ball joints on them.... and the shocks are just normal dual rates so really i dont think i answerd your question? Quote
EastCoast Banshee Posted April 10, 2007 Report Posted April 10, 2007 Unless the shocks were made for +2 a-arms its gonna be soft. You can always crank the pre-load all the way up and it you have the ability to adjust compression turn it almost all the way up. This is only a quick fix they will need re-valve and sprung. Places like TCS can do the job. Quote
Washburn Posted April 11, 2007 Report Posted April 11, 2007 If they are too soft work with what adjustments you have. New main springs wont do it You will need a revalve definatly Works are usualy stiff shocks when they are setup rite. Quote
SoCalinIt Posted April 11, 2007 Report Posted April 11, 2007 Push the top collar down and move the cir clip down a couple of spots. If this doesn Quote
jayzx10r Posted April 20, 2007 Report Posted April 20, 2007 Maybe you can trade springs with YAMAHA04. His are too stiff!! Jay From SanD. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.