highroller355 Posted February 21, 2007 Report Posted February 21, 2007 i have a hinson set up now. couple rides on it its slipping. what can i get that will hold up a little better ? i have a spare set of dirt digger clutches how would the work with the hinson basket? also could this be my problem why it feels like it falls flat on its face up stairs? it still pulls the wheels in the beginning of each gear then settles down but after warm its slipps then grabs on/off any input will help thanks Quote
wesw Posted February 22, 2007 Report Posted February 22, 2007 with that hinson are you running 8 disk?hinson setup run 8 disk you might need to look into it. Quote
highroller355 Posted February 22, 2007 Author Report Posted February 22, 2007 (edited) with that hinson are you running 8 disk?hinson setup run 8 disk you might need to look into it. just opened her up for the first time hinson basket with stock pressure plate and i guess carrier or what ever its called that holds the discs.7 disks. also it was making a ton of noise on the clutch lever side almost like a throw out bearing went bad in a stick car .if i would bring the idle up just off idle or pull the cluch in the noise would stop ,let it back out or bring it back to low idle wait a couple sec the noise comes back. theres a nut and bolt in the middle of the pressure plate mine have alot of play are they suppose to be tight Edited February 22, 2007 by highroller355 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.