Struble Posted January 25, 2007 Report Posted January 25, 2007 yeah im lookin for a decent banshee frame in mich so i can start building my flat tracker. frame dosent need to be perfect it dont matter if its j-arm or a-arm Quote
kaotik1 Posted January 25, 2007 Report Posted January 25, 2007 yeah im lookin for a decent banshee frame in mich so i can start building my flat tracker. frame dosent need to be perfect it dont matter if its j-arm or a-arm Check my post, I have one pick your own powdercoat color too. Would be prefect! A-arm and straight Quote
dajogejr Posted January 25, 2007 Report Posted January 25, 2007 Finally!! I'm from MI too. St. Clair Shores. I have a frame, A arm, straight as an arrow, with title and clean. I'm going to put it back together as a roller...or will sell frame only. Click on the pic in my sig to see the bare frame. PM me if you're interested.... I should have the frame back soon (just don't feel like driving to a bud's house to get it) and all the rest of the stuff to complete the roller are in my garage.... Quote
Struble Posted January 25, 2007 Author Report Posted January 25, 2007 Finally!!I'm from MI too. St. Clair Shores. I have a frame, A arm, straight as an arrow, with title and clean. I'm going to put it back together as a roller...or will sell frame only. Click on the pic in my sig to see the bare frame. PM me if you're interested.... I should have the frame back soon (just don't feel like driving to a bud's house to get it) and all the rest of the stuff to complete the roller are in my garage.... What Are ya lookint to get out of just the frame or if iwant it to be a roller. A roller would be great if the price is right. interested anything for trade have a couple of muzzleloaders. let me know Quote
dajogejr Posted January 26, 2007 Report Posted January 26, 2007 450 frame only with title. It's straight and solid. I removed the two small tangs for the stock pipes, and the two supports for the rear fenders. Other than that...it's bone stock frame. the normal scratches from being used for 10 years. 1K local pickup for the roller frame, and here is what it will come with: Frame Front arms, top and bottom, good ball joints. Newer bushings installed. Front Spindles, front rotors, front calipers, brake lines and hoses up front, and rock gaurds. Steering stem, Tie Rods, Tie Rod Ends. Will throw on a stocker set of handlebars...if you'd like. Rear +6 swing arm, stock carrier, newer bearings/seals in both the carrier and front swinger pivot point. Swingarm bolt has been drilled and tapped with a grease fitting. Durablue HD axle, +2 +4. Chrome has flaked, but it is 100% straight and strong. Rear Hubs, rear swinger linkage. Rear Stainless brake line for +6 swinger. If you pick it up in person, I will include 4 tires and rims. 4 holeshot XCRs front and rear, they have over 85% tread on the rear, 90% on the front. It will NOT include: Rear brakes (except for the line, if you want the +6 swinger) rear sprocket. It will NOT include shocks. I sold my stockers, and I'm KEEPING my Marvin Shaws. Since you mentioned flat track... If you don't want the longer +6 swinger, let me know...we can deal. I have another guy interested, but he is out of state and I have no $$ in my pocket. I would rather do a local MI deal so I could avoid hassles of shipping. I'd be willing to meet you 1/2 way, if you pay for my gas...(if you don't want it...still paying for my gas...LOL ) I'm willing to deal, and I have a lightened Drag J Arm chassis waiting for me...that's the only reason I'm offing this one. Jankab on here has my frame at his house, he can verify it's straight and clean. As said...clean title, I am the second owner of this bike. Let me know...PM me and we can swap numbers if you want to talk about this. Dave Quote
Struble Posted January 26, 2007 Author Report Posted January 26, 2007 450 frame only with title. It's straight and solid. I removed the two small tangs for the stock pipes, and the two supports for the rear fenders. Other than that...it's bone stock frame. the normal scratches from being used for 10 years. 1K local pickup for the roller frame, and here is what it will come with: Frame Front arms, top and bottom, good ball joints. Newer bushings installed. Front Spindles, front rotors, front calipers, brake lines and hoses up front, and rock gaurds. Steering stem, Tie Rods, Tie Rod Ends. Will throw on a stocker set of handlebars...if you'd like. Rear +6 swing arm, stock carrier, newer bearings/seals in both the carrier and front swinger pivot point. Swingarm bolt has been drilled and tapped with a grease fitting. Durablue HD axle, +2 +4. Chrome has flaked, but it is 100% straight and strong. Rear Hubs, rear swinger linkage. Rear Stainless brake line for +6 swinger. If you pick it up in person, I will include 4 tires and rims. 4 holeshot XCRs front and rear, they have over 85% tread on the rear, 90% on the front. It will NOT include: Rear brakes (except for the line, if you want the +6 swinger) rear sprocket. It will NOT include shocks. I sold my stockers, and I'm KEEPING my Marvin Shaws. Since you mentioned flat track... If you don't want the longer +6 swinger, let me know...we can deal. I have another guy interested, but he is out of state and I have no $$ in my pocket. I would rather do a local MI deal so I could avoid hassles of shipping. I'd be willing to meet you 1/2 way, if you pay for my gas...(if you don't want it...still paying for my gas...LOL ) I'm willing to deal, and I have a lightened Drag J Arm chassis waiting for me...that's the only reason I'm offing this one. Jankab on here has my frame at his house, he can verify it's straight and clean. As said...clean title, I am the second owner of this bike. Let me know...PM me and we can swap numbers if you want to talk about this. Dave I am definatly interested in the roller i have a bunch of stuff u p for sale at the moment so let me see what i can get out of all that. im on unemployment so i only get paid every 2 weeks. I would prolly just drive right to your house to pick it all up it would be easier for me. yeah i prolly wont need the 6 inch swinger might not handle to good for me. i have my guns up for sale also so thats gonna help me out a little if they sell. Cell is 616-755-0893 oh yeah my Name is Bob Quote
dajogejr Posted January 26, 2007 Report Posted January 26, 2007 I am definatly interested in the roller i have a bunch of stuff u p for sale at the moment so let me see what i can get out of all that. im on unemployment so i only get paid every 2 weeks. I would prolly just drive right to your house to pick it all up it would be easier for me. yeah i prolly wont need the 6 inch swinger might not handle to good for me. i have my guns up for sale also so thats gonna help me out a little if they sell. Cell is 616-755-0893 oh yeah my Name is Bob Bob, I'll PM you my phone number, I don't like putting that OR my email on public forums...asking for trouble. I'm in the same boat. I took it all apart because I was going to powdercoat the frame, have it shaved, etc. My buddy who has my motor already has a shaved Jarm, chrome drag J arms, etc. It just needs paint. In the interest of saving time...I'm going to run that frame. I thought all my pieces would sell quickly...they're not. So, I"m putting it together as a roller.... I really don't want someone to have a to pay a couple hundred for shipping, and I really don't want to ebay it...but, I have no need for it. It'll take me a couple of hours to put it all back together, so...just let me know. Quote
dajogejr Posted January 26, 2007 Report Posted January 26, 2007 Sold to Struble pending payment...Thanks Bob!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.