Pipe Problems

[ALTVATER]

I am just getting my bike back together and i am wondering if anyone has any advice or any pics of motor mounts. the problem is i just got sheaer inframes and i tried fitting my left pipe. it was touching the head and my silencer would not fit up tight to my rear mounts. i am guessing i fucked up on putting the motor in but i dont see how it can go any different. if anyone has any ideas let me know i am really pissed right now and am read to send my pipes back to get new ones.

[fastbanshee8]

It's not uncommon, to have to put spacers in between the pipe hangers, and the frame, when putting on inframe drag pipes. I had to do it with my CPI's. I went to the local hardware store, and got some 3/8" thick nylon spacers, with a hole already in them. I also had to use the same spacers, between the silencers, and the frame, in the back.

[moneybags]

My shear small bore pipes have a 1 inch spacer betwen the pipe and hanger. My old pipe mount was bent over to make room for the pipe aswell. The one on the botton of the fram on the right side. I ont know if that was nessary cauce I did not put them on.

[ALTVATER]

Thanks for the help. I have came to the conclusion that there isn't a drag part that doesn't have to be modified before installing it.