AZ Erik Posted November 5, 2006 Report Posted November 5, 2006 Let me know if your interested, the eBay auction doesn't end until Monday night but so far I have a bunch of tire kickers that are realizing the bike is a bit more than they thought it would be (power and pretty wise) So it looks like I'll be parting it more than likely. You know that sweet swinger everyone asks me about? it's first on the list: Chome +5 round tube, round house carrier, WITH bearing carrier and flames, includes Brake mount, stainless brake line, and billet brake line clamps, does not include rear brake. Does include swingarm bearings and seals. I'd like to get $450 out of it. Laker Customs black plastics, front and rear, minimal scratches: $200 89 Frame (No title), and spindles Powder coated Burgandy metallic red (almost a candy) the usuall tabs cut off and cleaned up. No wrecks, damage, nearly not a scratch. $400 Durablue +4 axle, straight and clean, $200 4 mill motor combo: NOT override tranny. No chain damage. 4 Mill hot rods crank. New WMS blaster pistons (Bore 66.25), Coolhead with Noss 4 mill custom domes, twin 36 PWK's, Reed spacers (to clear the clutch), DUncan racing billet 36mm intakes, V-force 3's, Mild porting (not sure who or how much), new ebc clutch, Billet water pump, CPI Big bore inframe drag pipes, K&n clamp ons, Ricky stator timng plate and larger stator (not sure how large), lightened flywheel. got a roller? This is for you. Current compression is set up to 145 PSI at 3000ft, so it's a pump gas motor. Includes the old miscut domes as well.$2000 for the whole thing. POwder coated Black stearing stem, $40 shipped CDI, hubs, regulator, radiator all still in the air. I'm sure there is more. Depending on interest the motor might be pieced as well. THIS THREAD IS TO GAUGE INTEREST AND GET PEOPLE IN LINE> If someone does not buy this bike tomorrow night it's coming appart. Get in your dibs now! Quote
slapaho Posted November 6, 2006 Report Posted November 6, 2006 Let me know if your interested, the eBay auction doesn't end until Monday night but so far I have a bunch of tire kickers that are realizing the bike is a bit more than they thought it would be (power and pretty wise) So it looks like I'll be parting it more than likely. You know that sweet swinger everyone asks me about? it's first on the list: Chome +5 round tube, round house carrier, WITH bearing carrier and flames, includes Brake mount, stainless brake line, and billet brake line clamps, does not include rear brake. Does include swingarm bearings and seals. I'd like to get $450 out of it. Laker Customs black plastics, front and rear, minimal scratches: $200 89 Frame (No title), and spindles Powder coated Burgandy metallic red (almost a candy) the usuall tabs cut off and cleaned up. No wrecks, damage, nearly not a scratch. $400 Durablue +4 axle, straight and clean, $200 4 mill motor combo: NOT override tranny. No chain damage. 4 Mill hot rods crank. New WMS blaster pistons (Bore 66.25), Coolhead with Noss 4 mill custom domes, twin 36 PWK's, Reed spacers (to clear the clutch), DUncan racing billet 36mm intakes, V-force 3's, Mild porting (not sure who or how much), new ebc clutch, Billet water pump, CPI Big bore inframe drag pipes, K&n clamp ons, Ricky stator timng plate and larger stator (not sure how large), lightened flywheel. got a roller? This is for you. Current compression is set up to 145 PSI at 3000ft, so it's a pump gas motor. Includes the old miscut domes as well.$2000 for the whole thing. POwder coated Black stearing stem, $40 shipped CDI, hubs, regulator, radiator all still in the air. I'm sure there is more. Depending on interest the motor might be pieced as well. THIS THREAD IS TO GAUGE INTEREST AND GET PEOPLE IN LINE> If someone does not buy this bike tomorrow night it's coming appart. Get in your dibs now! what kind of tires do you have Quote
AZ Erik Posted November 6, 2006 Author Report Posted November 6, 2006 what kind of tires do you have The fronts would be the only to go. They are sand stars on douglas 160's Quote
AZ Erik Posted November 7, 2006 Author Report Posted November 7, 2006 (edited) pm sent Replied. Auction ends in in 30 minutes http://cgi.ebay.com/ebaymotors/ws/eBayISAP...E:IT&ih=015 Edited November 7, 2006 by AZ Erik Quote
tree454 Posted November 7, 2006 Report Posted November 7, 2006 I am interested in the pipes if you will seperate. Quote
AZ Erik Posted November 7, 2006 Author Report Posted November 7, 2006 I am interested in the pipes if you will seperate. Parting thread to come. Everything execpt the chrome front arms, brake lines, foot pegs, nerfs and seat will go Looks like I'll have to part the engine as well. Quote
majicmike Posted November 8, 2006 Report Posted November 8, 2006 I would like the rear brake caliper Quote
r/atvshee Posted November 8, 2006 Report Posted November 8, 2006 how much for the carbs and manifolds? Quote
00tbanshee Posted November 8, 2006 Report Posted November 8, 2006 interested in crank and pistons check your pm's Quote
smwood79 Posted November 8, 2006 Report Posted November 8, 2006 I am also interested in the pipes if you still have them. What would you want shipped to 97056? [email protected] Quote
AZ Erik Posted November 8, 2006 Author Report Posted November 8, 2006 I am also interested in the pipes if you still have them. What would you want shipped to 97056? [email protected] See parting thread: http://www.bansheehq.com/forums/index.php?showtopic=69163 Intakes $100 Carbs $250 (By the set and I'll toss in the brand new K&N pods with outerwears and the cable) Quote
r/atvshee Posted November 8, 2006 Report Posted November 8, 2006 damn thats a good price. i might have to talk my dad into buying himself those. the 2-1 carb setup is killing him :laugh: ... Quote
odaen Posted November 8, 2006 Report Posted November 8, 2006 money sent for thumb throttle and kicker Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.