platinumjason Posted June 7, 2006 Report Posted June 7, 2006 Switching to clamp on filters, wheres everyone put the relocation bracket at? Quote
2003LimitedBanshee Posted June 8, 2006 Report Posted June 8, 2006 Some people will put it in between the a-arms suspended in the frame, or remove it all together. If you get the Modquad (or similar) bracket it will bolt in the original location. That's what I did, and if you reroute the coolant lines it will recirculate as intended, giving you some added capacity. Quote
ssanddemon Posted June 8, 2006 Report Posted June 8, 2006 (edited) Something you can try: Cut the back off the stock airbox, just retaining the two top mounting bolts, and the back of the airbox with the two bottle mounting pegs sticking up. Holds the bottle just fine. Sturdy, free, decent-looking if you are somewhat careful with a hacksaw, and corrosion proof. Edited June 8, 2006 by ssanddemon Quote
r/atvshee Posted June 8, 2006 Report Posted June 8, 2006 Something you can try: Cut the back off the stock airbox, just retaining the two top mounting bolts, and the back of the airbox with the two bottle mounting pegs sticking up. Holds the bottle just fine. Sturdy, free, decent-looking if you are somewhat careful with a hacksaw, and corrosion proof. thats exactly what i did..but im thinkin about relocating it to the front or just removing it in the future. Quote
RIPPEN Posted June 8, 2006 Report Posted June 8, 2006 relocate it to the fuckin trash! Thats where mine went RIPPEN Quote
chronicwatson Posted June 9, 2006 Report Posted June 9, 2006 i ripped mine off and threw it in the can to. so i'm 4 Quote
scoots shee Posted June 9, 2006 Report Posted June 9, 2006 i ripped mine off and threw it in the can to. so i'm 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.